Posted using the WoodsBuggy Mobile App
| Attachments: |
|
1376791203246.jpg [ 54.98 KiB | Viewed 2978 times ] |
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| trade 1-1/2" ceramic coated bobcat tip http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=15872 |
Page 1 of 1 |
| Author: | hillaholic [ Sat Aug 17, 2013 9:58 pm ] |
| Post subject: | trade 1-1/2" ceramic coated bobcat tip |
Looking to trade a 1-1/2 " ceramic coated bobcat exhaust tip for a u bend tip. |
|
| Author: | hillaholic [ Sat Aug 17, 2013 9:59 pm ] | ||
| Post subject: | Re: trade 1-1/2" ceramic coated bobcat tip | ||
Posted using the WoodsBuggy Mobile App
|
|||
| Author: | afterburnt [ Sun Aug 18, 2013 1:31 pm ] |
| Post subject: | Re: trade 1-1/2" ceramic coated bobcat tip |
Just do what I did, cut the pipe off at the collector and go to summit buy a u bend and weld it on. Then paint it silver and itll look ceramic 
|
|
| Author: | GuyP [ Sun Aug 18, 2013 3:56 pm ] |
| Post subject: | Re: trade 1-1/2" ceramic coated bobcat tip |
http://www.summitracing.com/parts/sch-015016u Summit Racing Part Number: SCH-015016U Outside Diameter (in): 1.500 in. Bend Angle: 180 degrees Tubing Material: Steel Tubing Finish: Natural Mandrel-Bent: Yes Tubing Gauge: 16-gauge Bend Radius (in): 2.500 in. Leg 1 Length (in): 9.000 in. Leg 2 Length (in): 9.000 in. Quantity: Sold individually. $13.00 Good idea Dave. Another winter project. |
|
| Author: | hpfreak [ Sun Aug 18, 2013 9:45 pm ] |
| Post subject: | Re: trade 1-1/2" ceramic coated bobcat tip |
Guyp that 2 1/2" is the radius not the diameter. That's too small 1 ½" diameter. |
|
| Author: | hillaholic [ Sun Aug 18, 2013 11:23 pm ] |
| Post subject: | Re: trade 1-1/2" ceramic coated bobcat tip |
That's to much like work. I'd rather trade if I can. I don't have time for fun and games. Posted using the WoodsBuggy Mobile App |
|
| Author: | GuyP [ Sun Aug 18, 2013 11:40 pm ] |
| Post subject: | Re: trade 1-1/2" ceramic coated bobcat tip |
hpfreak, my mistake, I wasn't thinking clearly, I measured my stinger 2" Ø. Summit has a large selection, different lengths and gauge thickness. http://www.summitracing.com/search?Sort ... d=u%20bend Part Number: PTE-H7038 4"r Part Number: SCH-020018U-40 4" r Part Number: PTE-H7040 6"r Part Number: PTE-H6933 6"r SS Part Number: PTE-H7064 6"r Part Number: PTE-H7037 bend not spec'ed Part Number: WLK-42311 6"r Part Number: SUM-622001 4"r Part Number: HOK-12240HKR 6"r Part Number: HOK-12340HKR 6"r Part Number: PTE-H7038 4"r |
|
| Author: | hpfreak [ Fri Aug 23, 2013 7:33 pm ] |
| Post subject: | Re: trade 1-1/2" ceramic coated bobcat tip |
Wasn't meaning to criticize just making sure you got the right thing Posted using the WoodsBuggy Mobile App |
|
| Author: | hpfreak [ Fri Aug 23, 2013 7:35 pm ] |
| Post subject: | Re: trade 1-1/2" ceramic coated bobcat tip |
On a side note most exhaust shops can bend up to 180° Posted using the WoodsBuggy Mobile App |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|