| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Ecotec wiring harness http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=15845 |
Page 1 of 1 |
| Author: | Jeremy1 [ Tue Aug 13, 2013 2:50 pm ] |
| Post subject: | Ecotec wiring harness |
Stock harness trimmed down. Will fit Ecotec up to 2005 has fuel pump and fan relays already wired in and odb 2 connector 5 wire hook up. I have two buggys with ecotecs in them and trimmed and wired the same as this harness. Also have a 2003 computer I can sell with it and will unlock and down load the same tune that is in my other two buggys asking 350 can work or other deal if you bring me another harness and computer 330 442 5166 |
|
| Author: | MadMike [ Tue Aug 13, 2013 3:16 pm ] |
| Post subject: | Re: Ecotec wiring harness |
WOW, that seems to be one hell of a good deal. Can you do Subaru computers? Some serious money to be made there. |
|
| Author: | Jeremy1 [ Tue Aug 13, 2013 6:44 pm ] |
| Post subject: | Re: Ecotec wiring harness |
No sticking to gm sorry |
|
| Author: | diamonddav [ Wed Aug 14, 2013 2:59 am ] |
| Post subject: | Re: Ecotec wiring harness |
Can you hook up a 2007 cobalt 2.2 ? Posted using the WoodsBuggy Mobile App |
|
| Author: | Jeremy1 [ Wed Aug 14, 2013 7:08 am ] |
| Post subject: | Re: Ecotec wiring harness |
Not sure what your looking to do harness will not work on a 2007 I bought the software from hp tunners and there is a long list of vehicles that it will work on but I am not that familiar with the 2007 . Posted using the WoodsBuggy Mobile App |
|
| Author: | Jeremy1 [ Sun Aug 25, 2013 9:06 am ] |
| Post subject: | Re: Ecotec wiring harness |
Just picked up another harness any offers? Posted using the WoodsBuggy Mobile App |
|
| Author: | Jarhead [ Wed Aug 28, 2013 9:21 pm ] |
| Post subject: | Re: Ecotec wiring harness |
Any Chance this can be made to fit a 2.4 from 06? We plan on going to a cable operated Throttle body |
|
| Author: | Jeremy1 [ Thu Aug 29, 2013 6:16 am ] |
| Post subject: | Re: Ecotec wiring harness |
I don't think so 06 has 4 separate coils I will have to look into it Posted using the WoodsBuggy Mobile App |
|
| Author: | Jeremy1 [ Thu Dec 12, 2013 2:12 am ] |
| Post subject: | Re: Ecotec wiring harness |
Have another harness all ready to go! 5 wire hook up and unlocked 330 442 5166 Posted using the WoodsBuggy Mobile App |
|
| Author: | Alpha Fab [ Thu Dec 12, 2013 3:47 pm ] |
| Post subject: | Re: Ecotec wiring harness |
Jarhead wrote: Any Chance this can be made to fit a 2.4 from 06? We plan on going to a cable operated Throttle body The only way to run a cable TB on the 2.4L is to run a MEFI 5. http://www.alphafabindustries.com/produ ... s-mefi-ecm |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|