| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Parts Wanted, cash paid http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=14398 |
Page 1 of 1 |
| Author: | kenny350 [ Mon Nov 26, 2012 11:41 pm ] |
| Post subject: | Parts Wanted, cash paid |
Hey guys looking for a front end for my rail buggy, i prefer a king pin but for the right price id be interested in a ball joint set up. Also looking for a 3 rib bus tranny, and even possibly a motor. Let me know what you guys have like i said i have cash 
|
|
| Author: | fortydegnorth [ Tue Nov 27, 2012 8:54 am ] |
| Post subject: | Re: Parts Wanted, cash paid |
Remember king pin and ball joint are two different dimensions. The spacing between the tubes is different between the two. The only way to change between the two is frame modification. |
|
| Author: | kenny350 [ Thu Nov 29, 2012 10:12 pm ] |
| Post subject: | Re: Parts Wanted, cash paid |
anybody? i am willing to travel |
|
| Author: | Red Barron [ Thu Nov 29, 2012 10:22 pm ] |
| Post subject: | Re: Parts Wanted, cash paid |
Are you wanting a complete front end with trailing arms, shocks, spindles,link pins and springs? I have a complete six inch wider chromoly front beam in my car now. My intentions are to replace the entire front beam with a six inch wider beam for coil over, 4x 1 1/2" trailing arms with thru rods. Beam- 6" wider 8" towers powder coated silver- $200 (includes spring packs) Trailing arms- 2 1/2" x 1 longer powder coated silver- $150 Saco rack mount (included) Fox 2.0 emulsion shocks 10" stroke - $200 Beefed up VW spindles with German link pins & bushings - $200 Limit straps - $100.00 Parts are gently used |
|
| Author: | kenny350 [ Thu Nov 29, 2012 10:40 pm ] |
| Post subject: | Re: Parts Wanted, cash paid |
id be interested can you send me pictures? |
|
| Author: | davehix [ Thu Nov 29, 2012 10:50 pm ] |
| Post subject: | Re: Parts Wanted, cash paid |
http://www.thesamba.com/vw/classifieds/ ... id=1394950 http://www.thesamba.com/vw/classifieds/ ... id=1354793 http://www.thesamba.com/vw/classifieds/ ... id=1365255 |
|
| Author: | Red Barron [ Thu Nov 29, 2012 11:42 pm ] |
| Post subject: | Re: Parts Wanted, cash paid |
   Here are some photos 
|
|
| Author: | Money520 [ Fri Nov 30, 2012 9:59 am ] |
| Post subject: | Re: Parts Wanted, cash paid |
I have a complete ballpoint front end with 3 inch raised spindles torsion springs stock shocks and a rack an pinion already on the Beam ready to bolt in $300 |
|
| Author: | kenny350 [ Sun Dec 02, 2012 9:57 pm ] |
| Post subject: | Re: Parts Wanted, cash paid |
Money520 Can you send me pictures? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|