com'on! just make 'em!
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Wanted - Bent or broken 930 stub axels http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=13766 |
Page 1 of 1 |
| Author: | Odyknuck [ Wed Jun 13, 2012 3:06 pm ] |
| Post subject: | Wanted - Bent or broken 930 stub axels |
Looking for your bent or broken 930 Stub axels or Trans flanges with stripped splines. Considering converting my Commanders CVs over to 930s and just need the flanges to do it. |
|
| Author: | RaceBugg1098 [ Wed Jun 13, 2012 3:33 pm ] |
| Post subject: | Re: Wanted - Bent or broken 930 stub axels |
com'on! just make 'em!
|
|
| Author: | Odyknuck [ Thu Jun 14, 2012 1:33 pm ] |
| Post subject: | Re: Wanted - Bent or broken 930 stub axels |
Ah Come on, why do that when there are so many EMPI pieces of junk out there. The flanges on them last way longer than the shafts do. I have bent two and broke two so I am sure others have too! |
|
| Author: | bige70chevy [ Thu Jun 14, 2012 11:20 pm ] |
| Post subject: | Re: Wanted - Bent or broken 930 stub axels |
been runnin my 930 set up for a little over a season...just replaced all 4 empi cvs with lobro last week and ordered a spare stub axle...didnt think i would need it but after seeing this im glad i did now...thanks for the heads up, and when i break one its got your name on it if you still need them |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|