WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

wanted
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=10860		 Page 1 of 1
Author:  davehix [ Tue Dec 14, 2010 9:16 pm ]
Post subject:  wanted
We need one 94mm stroker piston. AA brand if possible. thanks
Author:  kevin f [ Tue Dec 14, 2010 9:27 pm ]
Post subject:  Re: wanted
Im pretty sure I have a mahle. If u need it let me know.
Author:  Buckmaster [ Tue Dec 14, 2010 9:52 pm ]
Post subject:  Re: wanted
What happened to the one your missing if you dont mind me asking?
Author:  jayrod [ Tue Dec 14, 2010 10:10 pm ]
Post subject:  Re: wanted
ITS A SECRET! :mrgreen: :mrgreen: :twisted: lol
Author:  buggiejunky [ Tue Dec 14, 2010 10:33 pm ]
Post subject:  Re: wanted
he drilled too big of a hole in one!!! :idea: :twisted:
Author:  Graden2387 [ Tue Dec 14, 2010 10:48 pm ]
Post subject:  Re: wanted
buggiejunky wrote:
he drilled too big of a hole in one!!! :idea: :twisted:


its probably for ur buddy that borrowed ur heads :roll: :lol: :lol: 8)
Author:  Graden2387 [ Tue Dec 14, 2010 10:50 pm ]
Post subject:  Re: wanted
jayrod wrote:
ITS A SECRET! :mrgreen: :mrgreen: :twisted: lol


A YANKEE SECRET :twisted: :twisted: :twisted: :twisted: :twisted: :twisted: :twisted:
Author:  buggiejunky [ Tue Dec 14, 2010 10:51 pm ]
Post subject:  Re: wanted
we drill pistons up here not valves !!!! :twisted: :lol:
Author:  davehix [ Wed Dec 15, 2010 2:26 am ]
Post subject:  Re: wanted
Buckmaster wrote:
What happened to the one your missing if you dont mind me asking?

something got dropped in it and messed it up!!! :wink:
Author:  strokervw21 [ Wed Dec 15, 2010 2:54 pm ]
Post subject:  Re: wanted
that person must be a poor engine builder :!:
Author:  davehix [ Wed Dec 15, 2010 3:09 pm ]
Post subject:  Re: wanted
strokervw21 wrote:
that person must be a poor engine builder :!:

Whys it always the builder? :cry:
LMAO he's not the best but sure wasnt his fault!!!! he would be me :mrgreen: it happened when the carbs were removed to be cleaned.
Author:  strokervw21 [ Wed Dec 15, 2010 3:26 pm ]
Post subject:  Re: wanted
oh my bad then someone wasn't careful when removing the carbs that sucks :roll:
Author:  Odyknuck [ Wed Dec 15, 2010 5:41 pm ]
Post subject:  Re: wanted
davehix wrote:
strokervw21 wrote:
that person must be a poor engine builder :!:

Whys it always the builder? :cry:
LMAO he's not the best but sure wasnt his fault!!!! he would be me :mrgreen: it happened when the carbs were removed to be cleaned.



Hmm! that would have not happened on a Subie! Sorry Buddy I couldn't help myself! :wink: :mrgreen:
Author:  davehix [ Wed Dec 15, 2010 6:23 pm ]
Post subject:  Re: wanted
Odyknuck wrote:
davehix wrote:
strokervw21 wrote:
that person must be a poor engine builder :!:

Whys it always the builder? :cry:
LMAO he's not the best but sure wasnt his fault!!!! he would be me :mrgreen: it happened when the carbs were removed to be cleaned.



Hmm! that would have not happened on a Subie! Sorry Buddy I couldn't help myself! :wink: :mrgreen:


Yea your right Steve!!!A Subie would just blow a head gasket!!!!! :mrgreen: :mrgreen:
Author:  afterburnt [ Wed Dec 15, 2010 7:34 pm ]
Post subject:  Re: wanted
i have three 94 mahle pistons.they mach the three rods that i gave you :mrgreen:
Author:  Buckmaster [ Wed Dec 15, 2010 7:46 pm ]
Post subject:  Re: wanted
davehix wrote:
Buckmaster wrote:
What happened to the one your missing if you dont mind me asking?

something got dropped in it and messed it up!!! :wink:

I can see that happening.A buddy of mine took his carbs off once so he could swap them for another set and in the meantime he stuffed some rags into the intakes.When he went to put the new carbs on he did'nt get all the rags out of one intake.Needless to say the buggy ran like crap until he took the carbs back off to put another set on and finally seen the rag clogging the intake.The worst part about it was,we took the buggy to the best carb guy in town and he could'nt figure it out.
Author:  gasman [ Wed Dec 15, 2010 8:11 pm ]
Post subject:  Re: wanted
I got one but really don't know the brand is.only about 10hrs on it.Chad :mrgreen:
Author:  ridenrace6 [ Wed Dec 15, 2010 9:20 pm ]
Post subject:  Re: wanted
just wait till somebody gets drilled valves AND pistons :twisted: :twisted:
Author:  giveitagallon [ Wed Dec 15, 2010 10:14 pm ]
Post subject:  Re: wanted
jeez dave first a clutch and now a piston :twisted:
Author:  davehix [ Wed Dec 15, 2010 10:24 pm ]
Post subject:  Re: wanted
Not mine buddy this happen memorial day i beleive. i think you was there GIG
giveitagallon wrote:
jeez dave first a clutch and now a piston :twisted:
Author:  giveitagallon [ Wed Dec 15, 2010 10:39 pm ]
Post subject:  Re: wanted
owe yea i remeber that , just now tearing into it :shock: im like you cant stand to see a buggy down 8) you probly told him lets fix that thing more then once and finally got thru to him huh ,
Author:  Odyknuck [ Thu Dec 16, 2010 10:11 am ]
Post subject:  Re: wanted
Davehix@

Yea your right Steve!!!A Subie would just blow a head gasket!!!!! :mrgreen: :mrgreen:[/quote]


Ha! Ha! Some how I knew that was coming! :wink:
Author:  turboblue [ Thu Dec 16, 2010 1:23 pm ]
Post subject:  Re: wanted
I think I have a couple if you haven't found any yet.
Slipper skirt style IIRC.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/