Good set of 2x3 arms that were reinforced with plates welded on tops and bottoms of arms when new, comes with calipers with new pads and set of T1 stubs that were machined and drilled for bus cv's. $250.00
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Dean's 2x3 arms/calipers and stubs SOLD!! http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=7&t=10729 |
Page 1 of 1 |
| Author: | Graden2387 [ Sun Nov 21, 2010 3:44 pm ] |
| Post subject: | Dean's 2x3 arms/calipers and stubs SOLD!! |
Good set of 2x3 arms that were reinforced with plates welded on tops and bottoms of arms when new, comes with calipers with new pads and set of T1 stubs that were machined and drilled for bus cv's. $250.00
|
|
| Author: | vw_brandon [ Sun Nov 21, 2010 6:53 pm ] |
| Post subject: | Re: Dean's 2x3 arms/calipers and stubs |
interested in sellin the calipers? |
|
| Author: | FOX SHOX [ Sun Nov 21, 2010 6:58 pm ] |
| Post subject: | Re: Dean's 2x3 arms/calipers and stubs |
Could you see what shipping to Zeeland MI 49464 would run? Open for any trades or just CASH? Thanks Dave T |
|
| Author: | Graden2387 [ Sun Nov 21, 2010 7:38 pm ] |
| Post subject: | Re: Dean's 2x3 arms/calipers and stubs |
FOX SHOX wrote: Could you see what shipping to Zeeland MI 49464 would run? Open for any trades or just CASH? Thanks Dave T What you got to trade?? but cash would be nice |
|
| Author: | FOX SHOX [ Sun Nov 21, 2010 9:51 pm ] |
| Post subject: | Re: Dean's 2x3 arms/calipers and stubs |
8 pin flywheel and crank, a type 3 case cut for 90.5/92's, 92 pistons(no cylinders) a rebuildable 1600 core, A milk crate full of chrome, oil cooler, check the link and let me know. Thanks Dave T  ,  ,  ,  ,  .
|
|
| Author: | Graden2387 [ Mon Nov 22, 2010 10:39 am ] |
| Post subject: | Re: Dean's 2x3 arms/calipers and stubs |
shipping is around $45 |
|
| Author: | greenbeen [ Tue Nov 23, 2010 10:34 pm ] |
| Post subject: | Re: Dean's 2x3 arms/calipers and stubs |
do you still have the arms? im mainly interested in the arms if your interested in seperating them. also what kind of axles do you run? will they work with stock bus axles? thanks |
|
| Author: | Graden2387 [ Tue Nov 23, 2010 11:02 pm ] |
| Post subject: | Re: Dean's 2x3 arms/calipers and stubs |
yes i still have them and will seperate. i think thats a hell of a deal for everything now. yes stock bus axles work with these arms. |
|
| Author: | Minnesota_Duane [ Wed Nov 24, 2010 1:04 am ] |
| Post subject: | Re: Dean's 2x3 arms/calipers and stubs |
How much for the hubs and rotors to go with them? |
|
| Author: | FOX SHOX [ Wed Nov 24, 2010 6:35 am ] |
| Post subject: | Re: Dean's 2x3 arms/calipers and stubs |
I have to sell some stuff first. Thanks Dave T |
|
| Author: | Graden2387 [ Thu Nov 25, 2010 2:17 pm ] |
| Post subject: | Re: Dean's 2x3 arms/calipers and stubs |
Minnesota_Duane wrote: How much for the hubs and rotors to go with them? no rotors, whats listed is whats for sale |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|