| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| 902 shortback Roller - Parting out. http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=6&t=9601 |
Page 1 of 2 |
| Author: | nitro_mudder [ Wed Jun 02, 2010 8:49 am ] |
| Post subject: | 902 shortback Roller - Parting out. |
I am selling my old buggy. The 1600 DP on it it locked up. It ran when parked 2 years ago but has rusted tight since it was parked  It has a bosch Altenator on it, new disk brake kit, but needs passanger side rotor replaced. Sedan Tranny, the lower geared one I am told, if it matters. IRS rear end. Ball Joint front beam and 4 tires on it. Can part out if interested. Currently it is in Tennesse.260 450 9599 is my number, Jason  
|
|
| Author: | nitro_mudder [ Sun Jun 06, 2010 12:12 pm ] |
| Post subject: | Re: 902 shortback Roller $700 |
Hmmmm, if interested at all make an offer, I just want it gone, or I will strip off the parts and scrap it. No place to store it. |
|
| Author: | davehix [ Sun Jun 06, 2010 3:28 pm ] |
| Post subject: | Re: 902 shortback Roller $700 |
put it on the samba may have a good chance of getting rid of it there. |
|
| Author: | aboone993 [ Sun Jun 06, 2010 9:13 pm ] |
| Post subject: | Re: 902 shortback Roller $700 |
well i will get the ball started .... $300 |
|
| Author: | Russ-the-Buss [ Sun Jun 06, 2010 9:29 pm ] |
| Post subject: | Re: 902 shortback Roller $700 |
Hmmm..I thought you sold this buggy already? |
|
| Author: | Russ-the-Buss [ Sun Jun 06, 2010 9:30 pm ] |
| Post subject: | Re: 902 shortback Roller $700 |
how much for the locked up motor? |
|
| Author: | nitro_mudder [ Sun Jun 06, 2010 10:42 pm ] |
| Post subject: | Re: 902 shortback Roller $700 |
LOL, I did, but he thought the motor was in better shape. It happens  With or without the altinator and weber carb?
|
|
| Author: | Russ-the-Buss [ Mon Jun 07, 2010 8:58 pm ] |
| Post subject: | Re: 902 shortback Roller $700 |
as it is? |
|
| Author: | nitro_mudder [ Mon Jun 07, 2010 11:07 pm ] |
| Post subject: | Re: 902 shortback Roller $700 |
????? make me an offer. |
|
| Author: | kybuggy1 [ Wed Jun 09, 2010 1:31 pm ] |
| Post subject: | Re: 902 shortback Roller $700 |
$50. You add a rear cage, tree bars, paint the new stuff, get it running and deliver it to me. You said "make me an offer".........  
|
|
| Author: | Buckmaster [ Wed Jun 09, 2010 1:36 pm ] |
| Post subject: | Re: 902 shortback Roller $700 |
How much for the front wheels? |
|
| Author: | nitro_mudder [ Wed Jun 09, 2010 3:48 pm ] |
| Post subject: | Re: 902 shortback Roller $700 |
Give me a call, we will work someting out. |
|
| Author: | nitro_mudder [ Sat Jun 12, 2010 1:43 pm ] |
| Post subject: | Re: 902 shortback Roller $700 |
Ok, guess its getting parted out. Engine is gone. $100 for the balljoint beam with stock box. $200 For the frame with rear torsion and seats. $25 for the pedal assem. $50 for the fuel tank. $25 for the electric fuel pump. $50 for the sedan trans. $50 for the front wheels. $75 for the rear wheels. $175 for the rear disk brakes. It is in clarksville TN right now, but will be hearing to Indiana. Let me know if you want any of these items. |
|
| Author: | ducktape [ Sun Jun 13, 2010 1:17 am ] |
| Post subject: | Re: 902 shortback Roller - Parting out. |
How big are the rear tires? I want the chassis, but I can't afford it right now. |
|
| Author: | giveitagallon [ Sun Jun 13, 2010 9:02 am ] |
| Post subject: | Re: 902 shortback Roller - Parting out. |
jason , can the tank make it to the hillclimb ? if so im interested in it , the straps will go with the tank correct ? thanks jason |
|
| Author: | Buckmaster [ Sun Jun 13, 2010 10:08 am ] |
| Post subject: | Re: 902 shortback Roller - Parting out. |
If your coming to the hillclimb,bring the front wheels with you and i'll buy them. |
|
| Author: | nitro_mudder [ Sun Jun 13, 2010 2:12 pm ] |
| Post subject: | Re: 902 shortback Roller - Parting out. |
Guys the buggy is at Bmoore's house in Clarksville, TN. He is not heading to the hillclimb. Not sure if anyone lives near him that can bring them. ???????? So not sure what I can do at the moment, lol. |
|
| Author: | Firebug [ Sun Jun 13, 2010 3:25 pm ] |
| Post subject: | Re: 902 shortback Roller - Parting out. |
If I go up 65 I may be able to meet him,,,surely someone up there is coming to Ohio though. |
|
| Author: | racefreakj77 [ Mon Jun 14, 2010 11:15 am ] |
| Post subject: | Re: 902 shortback Roller - Parting out. |
I live in Clarksville and will be glad to bring them. Let me know. bmoore knows how to get ahold of me. |
|
| Author: | racefreakj77 [ Mon Jun 14, 2010 1:52 pm ] |
| Post subject: | Re: 902 shortback Roller - Parting out. |
i will probably take the front beam if i can get the stering shaft and stearing wheel with it. |
|
| Author: | nitro_mudder [ Mon Jun 14, 2010 8:33 pm ] |
| Post subject: | Re: 902 shortback Roller - Parting out. |
Works for me RF. Call me when you can, # is on the first post. |
|
| Author: | nitro_mudder [ Mon Jun 14, 2010 8:35 pm ] |
| Post subject: | Re: 902 shortback Roller - Parting out. |
ducktape wrote: How big are the rear tires? I want the chassis, but I can't afford it right now. tires are 31 11.5 15r goodyear wranglers, not alot of tread left. I'm in no hurry on the chasis, but bmoore might be, its at his house.
|
|
| Author: | ky-bc [ Tue Jun 15, 2010 12:21 pm ] |
| Post subject: | Re: 902 shortback Roller - Parting out. |
If Racefreak doesn't take the front beam I will...... |
|
| Author: | nitro_mudder [ Fri Jun 18, 2010 3:17 pm ] |
| Post subject: | Re: 902 shortback Roller - Parting out. |
Buckmaster wrote: If your coming to the hillclimb,bring the front wheels with you and i'll buy them. giveitagallon wrote: jason , can the tank make it to the hillclimb ? if so im interested in it , the straps will go with the tank correct ? thanks jason Racefreak said he can bring these to the hillclimb next weekend if you guys still want them. Just post on here if you want him to bring them. |
|
| Author: | MickeyMouse [ Thu Jul 01, 2010 8:41 pm ] |
| Post subject: | Re: 902 shortback Roller - Parting out. |
Nitro, Are the rear wheels still for sale? |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|