09 Bee Line pack rat welded at drews
Bee Line 3x3 arms
Lobro 930 joints race preped
all new bearings and seals
SAW poly bushings
SAW axles
SAW 28mm torsion bars
6" wider front beam with 10" towers
Fox 10" coilover shocks
2x4 woods front arms from drews
3" raised spindles with balljoint stubs from drews
pro comp limit straps
Econo rack
15x14 steel wheels
New 500x15 tires on front
New 31-15.50 cut tractors on back
front and rear disc brakes
cnc pedals
empi cut brakes
poly seats with covers and new rci harness
Scat drag fast shifter
fresh 6 rib trans
kennedy stage 2 clutch
electrical system fused and relayed with schematic
8 gallon jaz fuel cell with aviation foam inside
comes with t trailer
1/4" drilled aluminum trans plate
1/8" aluminum roof, floor and skid plates
1/16" aluminum sides



new 2276 engine with less than 6 hrs on it
Empi 5.6 h beam rods with arp bolts
CB crank
street eliminator heads
dual 44 webers
110 cam with 1.25 rockers
msd 6al with 6000 rpm rev limiter
msd hvc coil
electronic distributor
full flowed case
t4 oil cooler
Tri mill header

I have close to 10k invested in this buggy and countless hours making it right but can no longer ride, very dependable and ready to go anywhere never abused 7500.00 firm

some of the pictures were taken eariler this year, updated pics coming soon
http://i591.photobucket.com/albums/ss35 ... ggy045.jpg
http://i591.photobucket.com/albums/ss35 ... ggy022.jpg
http://i591.photobucket.com/albums/ss35 ... 210162.jpg
http://i591.photobucket.com/albums/ss35 ... 30/068.jpg
http://i591.photobucket.com/albums/ss35 ... ggy044.jpg
http://i591.photobucket.com/albums/ss35 ... ggy020.jpg