could u post some pics or send them to my email.
duneman44@windstream.net
thanks
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Bee-line Packrat Roller REDUCED Again $3500 NO MOTOR http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=6&t=2848 |
Page 1 of 1 |
| Author: | Aaron Creech [ Tue Jan 29, 2008 12:26 am ] |
| Post subject: | Bee-line Packrat Roller REDUCED Again $3500 NO MOTOR |
Car has been together about five years and ridden very little.Never been rolled or wrecked.Wheelbase is 102" Custom rear airbag suspension with 2x3 dual pivot trailing arms and large firestone bags,4" wider custom beam with tubular towers and adjusters,stock arms with wright place kingpin spindles(not combo spindles),Saco magnum rack with ford tie rod ends and 7/8"hex aluminum tie rods.Rancho shocks all around 9000's in the rear and 5000's up front.091 6 rib with stock gearing and a super diff,bus cv's and axles,full flow filter and oil cooler on the car. Has CNC pedals and steering brake A-N fittings on every line,Scat shifter,Jaz Poly Turbo seats(the ones with wings at the shoulders) sliding tracks on both seats,RCI 5 point harnesses,passenger grab bar,spun aluminum 10x33 gas tank,diamond plate storage box behind seats,diamond plate floor,fiberglass body that fits nicely(all dzused on),Diamond plate roof,totally race bracedtop and front nice steering shaft bearing set-up that goes thru the windshield cross bar. Has CMS heavy duty aluminum wheels all around 12" rears and 4" fronts with 3 rib tractors and 4 ply firestone 23*(never been cut),Disc brakes on rear only with toyota 2 piston calipers. I also have a new T-trailer that I built for the car which I never finished,it needs lights and paint to be complete.I will include the trailer with the sale. $3500 will e-mail pics on request. Please call me @ 513-594-2879 leave message if no answer.I'm sure I have left stuff out so please call with any ?'s Thanks Aaron Creech |
|
| Author: | Aaron Creech [ Sun Jul 27, 2008 2:57 pm ] |
| Post subject: | Re: Bee-line Packrat Roller |
. |
|
| Author: | duneman [ Sun Jul 27, 2008 8:50 pm ] |
| Post subject: | Re: Bee-line Packrat Roller |
could u post some pics or send them to my email. duneman44@windstream.net thanks
|
|
| Author: | Aaron Creech [ Tue Aug 05, 2008 7:37 pm ] |
| Post subject: | Re: Bee-line Packrat Roller REDUCED $4000 NO MOTOR |
BUMP Someone come get this poor buggy and give it the attention it deserves. |
|
| Author: | nickschlemer [ Wed Aug 06, 2008 12:24 am ] |
| Post subject: | Re: Bee-line Packrat Roller REDUCED $4000 NO MOTOR |
Post some pics of this thing. You might get some hits.. |
|
| Author: | Aaron Creech [ Tue Jan 20, 2009 8:22 pm ] |
| Post subject: | Re: Bee-line Packrat Roller REDUCED Again $3500 NO MOTOR |
Price reduced again.$3500 OBO.Need it gone,I have another project. |
|
| Author: | MadMike [ Tue Jan 20, 2009 8:46 pm ] |
| Post subject: | Re: Bee-line Packrat Roller REDUCED Again $3500 NO MOTOR |
Aaron, pictures |
|
| Author: | Bad Influence [ Tue Jan 20, 2009 9:49 pm ] |
| Post subject: | Re: Bee-line Packrat Roller REDUCED Again $3500 NO MOTOR |
email them to me and I'll post em for you. pm me for email. |
|
| Author: | Bad Influence [ Wed Jan 21, 2009 5:11 pm ] |
| Post subject: | Re: Bee-line Packrat Roller REDUCED Again $3500 NO MOTOR |
Aaron's buggy.     
|
|
| Author: | MadMike [ Wed Jan 21, 2009 6:17 pm ] |
| Post subject: | Re: Bee-line Packrat Roller REDUCED Again $3500 NO MOTOR |
Little TLC, that would be a nice car for someone. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|