WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

Build pictures, like my body?
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=5&t=2864		 Page 1 of 2
Author:  fortydegnorth [ Wed Jan 30, 2008 2:56 pm ]
Post subject:  Build pictures, like my body?
Well I finally got to the body panels, what a pain! I finished the side panels, roof, partial hood and dash. The dash gets a lot more work since I haven't gotten the switches or indicator lights mounted. The light bar still needs the rear support struts fabbed up. The HID lights came from Arizona. They were originally sold at Kragen Auto Parts but have been discontinued. A few dealers out west are still stocking them at $109 each. HID's can't usually be touched for less than $300 each. The Lowrance GPS in the middle of the dash is color and more of a straight line GPS, meaning its perfect for off road. Yes I get lost easily but more importantly it will be used as a speedo to be street legal.

Here it is without the light bar.
Image

With the light bar.
Image

Side panel.
Image

Dash with the color GPS that will be used as a speedo.
Image

Light bar and HID's close up. Still needs the supports to the roof.
Image

Back of light bar.
Image

Partial hood to hide the wiring and electronics.
Image
Author:  dunebuggy79 [ Wed Jan 30, 2008 3:08 pm ]
Post subject: 
Looks bad ass!!Thats a stalker frame right?Thats what I have they are sweet frames.

aaron
Author:  fortydegnorth [ Wed Jan 30, 2008 3:10 pm ]
Post subject: 
Actually it started out as a custom ordered Beeline frame but didn't work out quite like I wanted so I cut it up and basically made my own. I reused the floor portion from the original frame and bent my own from there. Yes its basically modeled after the stalker.
Author:  Roy [ Wed Jan 30, 2008 3:21 pm ]
Post subject: 
Awesome. I want a ride. :P
Author:  backwoods [ Wed Jan 30, 2008 3:31 pm ]
Post subject: 
man, that is nice.
Author:  turboblue [ Wed Jan 30, 2008 3:42 pm ]
Post subject: 
[quote='Roy']Awesome. I want a ride. :P[/quote]

Ride hell, let me drive......... 8)
Author:  FLIPIT [ Wed Jan 30, 2008 4:03 pm ]
Post subject: 
NICE MACHINE!!!!DO U GET PARTS OFF OF LARRYS OFFROAD?
Author:  GAMNTRAIL [ Wed Jan 30, 2008 4:03 pm ]
Post subject: 
Thats a Baaaaad buggie !
Author:  volksdude2007 [ Wed Jan 30, 2008 4:35 pm ]
Post subject: 
hey flip it i was just wondering is that photo your avatar because on my screen it is very big but maybe it is just my computer
Author:  backwoods [ Wed Jan 30, 2008 4:43 pm ]
Post subject: 
might try this

Image
Author:  turboblue [ Wed Jan 30, 2008 4:47 pm ]
Post subject: 
[quote='volksdude2007']hey flip it i was just wondering is that photo your avatar because on my screen it is very big but maybe it is just my computer[/quote]

It ain't your computer.

Flipit, you need to resize your avatar.
It's taking up a lot of screen on this end........ :eek:

Try this program:
www.irfanview.com
Author:  FLIPIT [ Wed Jan 30, 2008 4:53 pm ]
Post subject:  OK
OK SORRY JUST LEARNING
Author:  FLIPIT [ Wed Jan 30, 2008 4:55 pm ]
Post subject: 
BACKWOODS ANYTIME LOTS OF FUN 11 BARS TOUCH WATER
Author:  FLIPIT [ Wed Jan 30, 2008 4:57 pm ]
Post subject: 
GAMNTRAIL THANK U
Author:  rockrockets1 [ Wed Jan 30, 2008 5:06 pm ]
Post subject: 
will call him SUPER AVATAR
Author:  Kyle [ Wed Jan 30, 2008 5:41 pm ]
Post subject: 
just go in and use this as your avatar

http://i32.tinypic.com/bfop4i.jpg
Author:  backwoods [ Wed Jan 30, 2008 5:57 pm ]
Post subject: 
Flipit try this i went ahead and resized it for you. This should be standard avetar size.

Image
Author:  fortydegnorth [ Wed Jan 30, 2008 6:38 pm ]
Post subject: 
Hey flipit, I have used Larry's and Drew's for a lot of parts on my last rail. I have ordered most of the parts on the internet since a lot of them are pretty specialty type parts. I made the frame, beam, suspension, trans mounts and most everything else. Since I'm water cooled a lot of parts came from Jegs and Summit Racing. I need parts that neither Drew's or Larry's carry like radiator, overflow tank, EFI fuel pump and filter etc. I really like both places and hope Larry's makes it, they always seem to be struggling. There is a ton of knowledge at that place.
Author:  DVS1 [ Wed Jan 30, 2008 6:40 pm ]
Post subject: 
Damn, does that look good. You must have over $1000 in HID's. We won't need lights if we ride with you.(lol) Keep up the pic's
Author:  FLIPIT [ Wed Jan 30, 2008 6:45 pm ]
Post subject: 
BACKWOODS/KYLE THANK YOU!! HOPEFULLY ILL GET IT DAM I HATE COMPUTERS SOMETIMES
Author:  JeffClay [ Wed Jan 30, 2008 6:45 pm ]
Post subject: 
bentley of buggies, haha. that thing is badass, i want it haha. if only you had a flip out dvd player though (j/k)! doin it right, great job!
Author:  FLIPIT [ Wed Jan 30, 2008 6:48 pm ]
Post subject: 
FORTYDEGNORTH -- I AGREE VERY GOOD PEOPLE ALWAYS BEEN RIGHT 2 ME!!HOPE THEY MAKE IT 2
Author:  fortydegnorth [ Wed Jan 30, 2008 7:15 pm ]
Post subject: 
The DVD player would be nice I have one in my truck that I use with a backup camera. Never even put a DVD in it! The radio next to the wheel is a CD player, the face flips down. Everything on it is sealed and is meant for marine use to keep water out. I have marine speakers that will mount behind the seats. I spent a couple years gathering parts and building to keep the cost a little easier to swallow. Hey Flipit I lived in Galloway for a year when I was working in Columbus. I live in Glenchester Lakes apartments. Columbus is taking you guys over you'll end up in London or Springfield before long! Thanks for the compliments it keeps me motivated. I'm thinking gloss black frame and brushed alluminum panels, what do you think? Hey DVS1 the HID's were $456 shipped for all four.
Author:  DVS1 [ Wed Jan 30, 2008 7:31 pm ]
Post subject: 
WOW, $456, thats a smokin deal! I was gonna go with them, but the cheapest I could find them was about $600 a pair.
Author:  Kyle [ Wed Jan 30, 2008 7:35 pm ]
Post subject: 
flipit at the top of the page click

PROFILE

then scroll down and where it says upload avatar from url type in

http://i32.tinypic.com/bfop4i.jpg

then hit submit at the bottom. that will fix ya right up

kyle
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/