Here is part of the trailer that I am currently building.

_________________
"Loud pipes saves lives"

what kind of brg housings are you running hub assembly whats that off of

What are the hubs from? Looks good. keep pics coming.

wow were we thinking the same thing or what look at the time

The bearing hubs are for the rear of an 82-88 Caddy Cimmeron, it cost $100 a piece and it is lifetime warranty.

_________________
"Loud pipes saves lives"

Did you turn the tube at the bearing housings for strength or other? Looks good.

_________________
Travis

Yes, I turned the tubing on the axle part for extra strenght and also more strenght throughout the trailer including front and rear. The axle is about 4" behind the torsions on the buggy.

_________________
"Loud pipes saves lives"

Times were dead on!

same hub a cosica and cavaliers lots of then around. chad i have a spare if u need 1

_________________
i dont always ride my buggy but when i do im glad it has a bad ass bow tie makin the horsepower

Jesus loves me, but everyone else thinks im an asshole.

Our Lady of Blessed Acceleration, don't fail us now!

Ok I will keep that in mind. Thanks!

_________________
"Loud pipes saves lives"

i will get it to you. i am going to the powder coater to drop off my wheels next week

_________________
i dont always ride my buggy but when i do im glad it has a bad ass bow tie makin the horsepower

Jesus loves me, but everyone else thinks im an asshole.

Our Lady of Blessed Acceleration, don't fail us now!

You having your wheels powder coated by Bobby Clark?

_________________
"Loud pipes saves lives"

yes

_________________
i dont always ride my buggy but when i do im glad it has a bad ass bow tie makin the horsepower

Jesus loves me, but everyone else thinks im an asshole.

Our Lady of Blessed Acceleration, don't fail us now!

dont you have a 28 foot toy hauler? i take it you are building this for short trips?

[quote='buggy66']What are the hubs from? Looks good. keep pics coming.[/quote]

Long time ago we used to build T trailers here at the shop.
Used junkyard Chrysler K car rear spindles.
They bolt on too.

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

[quote='JeffClay']dont you have a 28 foot toy hauler? i take it you are building this for short trips?[/quote]
That is correct, I am building it for short trips around the local area, like Grayson, Ky and Lewis County, KY, and probably for small parking areas, like the Cold Spot.

_________________
"Loud pipes saves lives"

boy that sure is some nice machine work on the hub adapters
what machine shop did you get that done at ??????? M.P.

just giving you a hard time chad

Tim

More progress pics as of today.........





I am going to have some diamond-plated runners made this week....

_________________
"Loud pipes saves lives"

Nice job- good looking welds-- keep up good work!

_________________
Mark

That's what I'm talking about!

High speed
Low drag
Teflon coated
And ready for action!

Very clean looking job you have done there. Keep up the good work on it and you will have a great trailer. Wish that I could weld that good.

The Wild Kids

_________________
I refuse to grow up therefore I will never grow old, and I will never die.

Thank you guys very much on my welding comments, I am very glad that teaching myself how to MIG weld finally pays off after 5 years since I bought my welder. I take pride in my work very much, if I don't like the way it turns out, I will go back and fix it to where I like it. I am also thinking about putting on half-torsion axles in it due to having trouble finding wheels that will fit the trailer without rubbing the frame unless I make some spacers to space it out (about 4", too much) I will have to use positive offset wheels because of the bolt pattern. It's never too late while you're in the middle of the project. Here is the info on the half-axles that I am thinking about. http://www.etrailerpart.com/halftorsionaxles.htm

_________________
"Loud pipes saves lives"

Might stop by here if you are close.
They have a Columbus location.

http://www.redneck-trailer.com/

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

Some more pics........still waiting on the runners though.

_________________
"Loud pipes saves lives"

Here is a picture of my 4-wheeler after the Big Rock ride this past Sunday.....

_________________
"Loud pipes saves lives"