_________________
*subiepower*

sorry wrong thread

_________________
*subiepower*

I would shy away from this one. I have seen it and it isn't pretty. I did not see it run with the stroker but if the motor is piece milled like the buggy I would be very leery of it. I would not recommend it to a friend... and as far as I am concerned... anyone on here is a friend so I thought I would throw this out there.

_________________
“Life is hard; it's harder if you're stupid.” - John Wayne -

looks pretty rough around the edges and I wouldn't count on the motor being anything other than the rest of car. One of the many instances you're merely taking someones word on internals unless they'd be cool with yanking a head off of it. I don't have a problem taking the time to disassemble top end if I was potentially interested! Does look like it has some decent parts, wilwood brakes, hyd clutch & cutter, T trailer. If it was closer to home I'd check it out, but don't wanna waste time/money/gas on driving that far for nothing

_________________
--WHEN IN DOUBT, THROTTLE OUT!!!--

Let the buyer beware, enough said

_________________
Water Cooled Consortium, Chairman of the Build (Former AC purist)

i just thought with whats there for the money it aint bad and i thought the same about the stroker you can tell alot about someone the way they keep there stuff to do a stroker right aint cheap and buy the looks of it they dont cae to much about it my opnion anyway

_________________
*subiepower*

look at the pic of the pedals. you see the welds have cracked between the floor and the side. this by itself is not a huge deal but i would be highly concearned about the rest of welds on the car.

_________________
If it ain't broke ill fix that