been wanting to know exactly what frame I've got. From what I've gathered it looks to be a berrien but couldn't figure out which one? I figured my best bet by far would be to ask some of you guys! And another thing, can anyone tell me what kind my front wheels are?? Any and all help like always is greatly appreciated!!

_________________
--WHEN IN DOUBT, THROTTLE OUT!!!--

Spindle mount wheels , and the most I can come up on the frame is barrien but which one ..
Not warrior or stalker . The way the back frame is designed has the Alabama style to it .
I could be wrong all together though

_________________
Theirs no replacement for displacement !

I'd say Fisher Frame:

http://fisherbuggies.com/buggies-and-fr ... mes-welded

_________________
"Obstacles are those frightful things you see when you take your eyes off your goal." -Henry Ford

It looks like a Rebel frame from Georgia. I don't think it is a Fischer (Price) frame. I hope I offend anyone but I have some first hand knowledge that says by a Berrian or anything other than Fischer. Pretty sad since I have know Ken Fischer for over 35 years.

_________________
Water Cooled Consortium, Chairman of the Build (Former AC purist)

x2.. looks like a berrien but they way the bars in the back loop around is the same as a fugitive or an invader

_________________
LEGALIZE BLUEGRASS!!!

Save a tree... eat a Beaver

I think it is a Chenowth chassis.


Front wheels are 5 spoke spindles made by Johnny's speed and Chrome.
JSC closed in the early '90's.


Edited to fix broken link

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

Im with Gary its a Chenowth chassis there was a lot of them in the 80's and I think if memory is correct should be around 92" wb with stock arms

x3

_________________
Just Stand On It!!!!

Chris

Wheelbase is right at 103" but it's been lengthend at some point. Thanks guys

_________________
--WHEN IN DOUBT, THROTTLE OUT!!!--

i had a jsc frame like that

_________________
i dont always ride my buggy but when i do im glad it has a bad ass bow tie makin the horsepower

Jesus loves me, but everyone else thinks im an asshole.

Our Lady of Blessed Acceleration, don't fail us now!

They look similar in the rear cage area to a Chenowth but the top and windshield frame is probably like this one.

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

thats an invader

_________________
LEGALIZE BLUEGRASS!!!

Save a tree... eat a Beaver

its a fugitive

_________________


I DO NOT FREE BASE COCAINE

you rite, i meant fugitve... rode one for 8 years, very good climbing chassis

_________________
LEGALIZE BLUEGRASS!!!

Save a tree... eat a Beaver

Agreed.
Invader was made by Johnny's Speed and Chrome.
purplerail said he had a JSC chassis.

Fugitive is a Bugpack chassis, they look very similar.

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

so is everyone agreeing that it's a chenowth? It doesn't really matter what it is to me really but it's just one of those things thats nice to know. thanks guys. Since yall figured this one out so fast can you look at my other one and see what it is? Posting a pic of it below....

_________________
--WHEN IN DOUBT, THROTTLE OUT!!!--

If the tubing is 1.750 od its called Advenger they were sold in the 70's early 80's

You remember those? What were you then, about 40?...........

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

If it is a Chenoweth frame it will have a id plate on the passenger side on the lower horizontal windshield bar.

_________________
Water Cooled Consortium, Chairman of the Build (Former AC purist)

I have a frame that looks like the one snail rail is selling, I have never heard of Advenger. Did they make different wheelbase's for different models, and where were they made?

I also wondered if Chenoweth ever made a frame with a chopped top? I know where there is a buggy that looks like a Chenoweth, but it has a chopped top, and I was wondering, could it be factory, or is it custom?

HAHAHA I think we're both old enough to remember them,,it was actually my 1st "factory" frame and it was spring 1979 so no I wasnt 40 lol then Ive had about 4 other berrien frames and now I got a stalker

Not sure were the Advengers were made but I bought mine from a tire store up around Youngstown Akron if memory is correct