I ran these on my old buggy. You will loose a little travel, but if it bottoms out it’s allot softer.
http://www.energysuspensionparts.com/proddetail.asp?prod=9.9132
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Front bump stops http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=4&t=7701 |
Page 1 of 1 |
| Author: | Ringer [ Fri Sep 25, 2009 11:57 am ] |
| Post subject: | Front bump stops |
I have a 6" wider warrior beam with 8" towers. Do most people run urethane bump stops, or just let the arm hit the built in metal one? |
|
| Author: | Firebug [ Fri Sep 25, 2009 12:54 pm ] |
| Post subject: | Re: Front bump stops |
Good question,,,I have no bump stops but I think the shock absorbs enough before it bottoms ,,or runs out of travel. I am working on a way to put on air bags which are bump stops within themselves. |
|
| Author: | hillaholic [ Fri Sep 25, 2009 1:09 pm ] |
| Post subject: | Re: Front bump stops |
I ran these on my old buggy. You will loose a little travel, but if it bottoms out it’s allot softer. http://www.energysuspensionparts.com/proddetail.asp?prod=9.9132
|
|
| Author: | MickeyMouse [ Fri Sep 25, 2009 6:08 pm ] |
| Post subject: | Re: Front bump stops |
I just let the arm hit the metal... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|