I have a bus front end,,,wider than beetle stock,, and heavy duty,,,read heavy,,,it takes a lot of fabbing to do. I want to go A-arm someday because I like the fabbing challenge. I don't see the air bags being any problem,,the problem I see with A-arm is it is going to take a lot of prep work,,read chopping,,,to just get started. And it will cost about as much as a beetle beam in bushings or heims. But it will be fun. In the mean time I am looking at converting my bus beam to air bags....it's gonna look like a space creature but ,,,,so
if there is such a thing .And figure it out everyone has his or her favorites. I built my wife 3 buggy's so far ,The first was a 98 in light buggy with cut grooved ditch diggers ,She done pretty well front end was in the air a lot,But that's climbing .Then I built her a buggy with a 8 in over front beam ,4 over WW arms ,WW king kong spindles, coil overs,2276 ,built tranny [put it in a box sent it too the coast with 1500 bucks and they sent me back a tranny ] 3x3 arms 930 set up and she done very well ,Then I built her a CD she said I should have never built all that other STUFF and I should have built this from the get go.I am inclined to believe her .This is jmo and hers. I have sold her buggy now I am building her a A-Arm buggy It will be the