I am wanting to know what kind of chassis my rail has. It has a short w/b I am think a 96. Not for sure atm. I will get a w/b measurement tomaro..
Here is some pics.
http://img38.imageshack.us/i/084nim.jpg/
http://img39.imageshack.us/i/085a.jpg/

It looks like a modified Berrian Warrior with a Beeline twist however it is not. Probably homemade.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

I dont know what kind it is. Its a short chassis. I dont think its home made. Bends and stuff is to good but the welds ant that pretty.

After enlarging the pictures I can see were the roll cage has been lifted. It could be a Warrior frame that has been modified several times over the years.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

It the cage has been lifted. Im guess some tall guy had it at one point.lol
Onley thing Im scared of is idk if they sluged it when this was done. Thanks

You could drill a small hole about an inch above and or below the welds and see how thick the material is. Then seal the holes up with weld or RTV.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

Thanks knuck.. I never thought of that. I was just about to go and cut the hole top of my cage off to see if it has been sluged...If it has't Im goin to add another rear hoop and mabey due away with the windshelid frame style..
Thanks you.