WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

IRS to Swingaxle conversion
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=4&t=5469		 Page 1 of 1
Author:  J.DiNapoli [ Thu Jan 01, 2009 11:47 am ]
Post subject:  IRS to Swingaxle conversion
I have a buggy with IRS torsion in it. Can I just swap springplates from IRS to swingaxle? I read Eric Debords info on Swingaxle to IRS but that involved cutting splines out of both springplates and swapping them along with torsion bars. The buggy is for my dad and he wants swingaxle. I cant talk him in to going bus so this is what i have to do. I really dont want to cut the torsion out of buggy and change so let me know what i can do. Thanks Jason
Author:  instigator [ Thu Jan 01, 2009 12:10 pm ]
Post subject:  Re: IRS to Swingaxle conversion
yes
Author:  J.DiNapoli [ Thu Jan 01, 2009 1:46 pm ]
Post subject:  Re: IRS to Swingaxle conversion
Yes, I can just swap springplates?
Author:  vwtravis [ Thu Jan 01, 2009 1:54 pm ]
Post subject:  Re: IRS to Swingaxle conversion
Yes you can switch spring plates and torsion bars.
Author:  nickschlemer [ Thu Jan 01, 2009 1:54 pm ]
Post subject:  Re: IRS to Swingaxle conversion
Yes you can talk your dad into it :D screw the swing..
Author:  J.DiNapoli [ Thu Jan 01, 2009 1:59 pm ]
Post subject:  Re: IRS to Swingaxle conversion
Why do I have to change torsion bars?
Author:  vwtravis [ Thu Jan 01, 2009 2:07 pm ]
Post subject:  Re: IRS to Swingaxle conversion
The swingaxle torsion bars are shorter than irs.
Author:  J.DiNapoli [ Thu Jan 01, 2009 3:17 pm ]
Post subject:  Re: IRS to Swingaxle conversion
Was there ever longer torsion bars on a swingaxle?
Author:  vwtravis [ Thu Jan 01, 2009 3:37 pm ]
Post subject:  Re: IRS to Swingaxle conversion
Not that I know of, the swingaxle bars are 21 3/4'' long.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/