WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/
Spring plate bushings http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=4&t=4850	Page 1 of 1

---

Author:	hillaholic [ Fri Oct 10, 2008 8:56 am ]
Post subject:	Spring plate bushings
I need to replace my rear spring plate bushings. I had the red poly ones in my old buggy and they squeaked like mad. Do they make better ones that don’t squeak? I found some rubber ones but they want $80 a side

---

Author:	Firebug [ Fri Oct 10, 2008 10:56 am ]
Post subject:	Re: Spring plate bushings
Something else to consider is the conversion,,,but make sure you get the real good heims..I fabbed up my own and they work great,,, before that I used neoprene bushings,,,my buggy squeeks everywhere anyway

---

Author:	rockrockets1 [ Fri Oct 10, 2008 10:58 am ]
Post subject:	Re: Spring plate bushings
get the red poly ones cover them with anti seize

---

Author:	MadMike [ Fri Oct 10, 2008 11:28 am ]
Post subject:	Re: Spring plate bushings
You still running air bags or do you have torsion springs?

---

Author:	Roy [ Fri Oct 10, 2008 5:14 pm ]
Post subject:	Re: Spring plate bushings
Get the YELLOW ones from McKenzies or SACO. They are way better than the red poly bushings. Coat them with the break in grease you get with them.

---

Author:	hillaholic [ Sat Oct 11, 2008 4:34 pm ]
Post subject:	Re: Spring plate bushings
I’m running stock dual spring plate torsion with sway away bars. What do I need they have 2”, 1-7/8”, and 1-3/4” sizes listed on Saco? They also list them as Flange, Knobby or Round and the 2” are red. I haven't had time to pull it apart yet thats why I ask. Check it out here http://www.sacoautoparts.com/products.php?cat=28&pg=2

---

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/