new buggy, 2x3 arms,with all new bearings & spacers.6-rib trans , bus joints & axles. about 1/4" clearance between spring plate & torsion stop at ride height. neither has been ground down any. have free movement on both axles,"sliding in & out of cv's when its suspended & at ride height. put it together with my old axles & joints after a few rides the driver side, outside cv started squeaking.in side is ok. so I put a new joint on the outside, clocked it, ran it 1 ride & its doing the same thing. ran about 4 miles on the hiway back home & heard it as I pulled in the driveway. outside driver side joint hot , the other 3 just warm . cleaned up old cv & found some hair sized shavings around the ball slots in the cage. couldn't exactly tell which part they were coming from. joint had the ball groove worn in both inner & outer housing though, so I thought that was the issue. any ideas why im having issues with this .gonna take it apart sat. what do I need to look for to help solve this?
_________________ ya cant beat fun!
|