| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Tubing size for king pin beam? http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=4&t=16779 |
Page 1 of 1 |
| Author: | klu408 [ Wed Mar 19, 2014 11:06 am ] |
| Post subject: | Tubing size for king pin beam? |
Does anyone have the spec of the tubing size for king pin beam? I'm going to air shocks and making a new beam without adjusters or shock towers. Sent from my SCH-I605 using Tapatalk |
|
| Author: | Drews Off Road [ Wed Mar 19, 2014 11:39 am ] |
| Post subject: | Re: Tubing size for king pin beam? |
We use 2 inch O.D. by .109 D.O.M. tubing for the regular duty beams and 2 in x .120 wall D.O.M. for the coil over stuff and if you want even stonger then switch the D.O.M. to 4130 chromoly.... |
|
| Author: | klu408 [ Wed Mar 19, 2014 11:53 am ] |
| Post subject: | Re: Tubing size for king pin beam? |
OK thank you. Do you sell it by chance? Sent from my SCH-I605 using Tapatalk |
|
| Author: | jesse [ Wed Mar 19, 2014 5:14 pm ] |
| Post subject: | Re: Tubing size for king pin beam? |
Get with madmike he makes nice beams and strong |
|
| Author: | RaceBugg1098 [ Thu Mar 20, 2014 12:04 pm ] |
| Post subject: | Re: Tubing size for king pin beam? |
I know drews sells it |
|
| Author: | klu408 [ Thu Mar 20, 2014 12:32 pm ] |
| Post subject: | Re: Tubing size for king pin beam? |
I looked it up and found some local I think shipping would be outrageous. ..lol Sent from my SCH-I605 using Tapatalk |
|
| Author: | Drews Off Road [ Fri Mar 21, 2014 8:31 am ] |
| Post subject: | Re: Tubing size for king pin beam? |
It is shippable but kinda heavy..... It is $7.75 per foot from us with no cut charges and you can order what length you need. I bet shipping to AL would be $20.00 or so......just to give you an idea. |
|
| Author: | klu408 [ Fri Mar 21, 2014 11:03 am ] |
| Post subject: | Re: Tubing size for king pin beam? |
That's not as bad as I thought. I may give you a call soon! Thanks alot. If I bought the homeplates and this at the same time would it still be free shipping? Sent from my SCH-I605 using Tapatalk |
|
| Author: | Drews Off Road [ Fri Mar 21, 2014 12:36 pm ] |
| Post subject: | Re: Tubing size for king pin beam? |
Sure anything we can UPS , not oversize, will be free freight when it is over $150.00......the tubing will be cut to 34" for stock width so that will not be oversize! I do not think the tubing is on our web page so you may have to call the order in and you can still paypl it or credit card. |
|
| Author: | klu408 [ Fri Mar 21, 2014 1:01 pm ] |
| Post subject: | Re: Tubing size for king pin beam? |
I'm 6" over stock will that matter? Sent from my SCH-I605 using Tapatalk |
|
| Author: | MadMike [ Fri Mar 21, 2014 1:58 pm ] |
| Post subject: | Re: Tubing size for king pin beam? |
UPS will ship anything under 6' in length. |
|
| Author: | buggybarn [ Mon May 19, 2014 11:50 am ] |
| Post subject: | Re: Tubing size for king pin beam? |
Madmike makes some good beams get with him |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|