trying to get some ideas on a front end its set up with a
balljoint now and don't want to cut my frame up to switch to
kingpin if any of you guys got some ideas or have
tried something to get some height out of it let me know thanks!!

_________________
sit down!!!!! hold on!!!! and scream!! cuz we're going
1915 counter cRank, mofoco 042 maule 94's vz15 and 5 rib built to the max!!!

The eaziest thing do is put another balljoint front end on it and be Dunn with or you will cut and rewelding on it good luck


Posted using the WoodsBuggy Mobile App iPhone

_________________
if you cant run with the big dogs than slow down and make fun of the little ones

How bout some spindles that are raised??


Posted using my IPHONE

_________________
#If the throttle isn't floored, Your NOT havin FUN!!!!#

I can't find them anywhere!

Posted using the WoodsBuggy Mobile App

_________________
sit down!!!!! hold on!!!! and scream!! cuz we're going
1915 counter cRank, mofoco 042 maule 94's vz15 and 5 rib built to the max!!!

Make em:)


Posted using my IPHONE

_________________
#If the throttle isn't floored, Your NOT havin FUN!!!!#

You can buy them new on dans performance parts

_________________


I DO NOT FREE BASE COCAINE

anybody have a suggestion for softening the front end? can you just take a few springs out? it has new shocks and ball joints, just super stiff! doesn't allow any flex when hitting a hill off camber, it just raises the other wheel as well causing it to jerk the steering wheel out of my hand? thanks

Are the ball joints in the right way? If they're in wrong they'll bind up and not move. Did you put new bushings in? What are the shocks for?

Yes you can remove springs. If you do remove same amount from top as you to from bottom.