Just got trough installing a new set of 3X3's and was wondering what the axle length should be with bug trans and type 2 cv joints and bus trans and type 2 cv joints. This is going in a play buggy so i might stay with bug trans beefed up a little rather than the big expense of the 091, not to mention i cant find one around where i live.

With bus trans and bus cv on 3x3's, you will need 19 1/4" axles. I don't think you will have enough angle to use type 1 stuff (bug/sedan). If you cant find 091 settle with the cheaper 002 three rib. You deffenintly want to go with a bus trans. though.

_________________
A broken clock is right two times a day.

with the 3x3's you can use a stock bus axle

I thought stock bus axles were 18-3/4 to be used with 2x3's?

[quote='frankenbuggy06']with the 3x3's you can use a stock bus axle[/quote]

There are three lengths I know of.

18-3/4"
19-1/4"
and 20-1/4" I think.

I use 18-3/4" for 2x3 and 19-1/4" for 3x3s"

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

YES

_________________
A broken clock is right two times a day.