Looking for gently used 2.5 coil over springs 14" tall 350# and or 12" tall 250# want to try to soften up the rear suspension without breaking the bank. Experimenting
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| WTB 2.5 coil springs http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=4&t=14385 |
Page 1 of 1 |
| Author: | Red Barron [ Sat Nov 24, 2012 6:17 pm ] |
| Post subject: | WTB 2.5 coil springs |
Looking for gently used 2.5 coil over springs 14" tall 350# and or 12" tall 250# want to try to soften up the rear suspension without breaking the bank. Experimenting
|
|
| Author: | MadMike [ Sun Nov 25, 2012 12:33 am ] |
| Post subject: | Re: WTB 2.5 coil springs |
How are the shocks valved? A big part of the ride comes from being valved properly. If they are set up too hard on valving they could be the right springs, just valved wrong. Re-valving is way cheaper than re-springing. Just something to consider. |
|
| Author: | fortydegnorth [ Sun Nov 25, 2012 9:08 am ] |
| Post subject: | Re: WTB 2.5 coil springs |
http://www.pirate4x4.com/forum/misc-stu ... trade.html |
|
| Author: | Red Barron [ Sun Nov 25, 2012 1:40 pm ] |
| Post subject: | Re: WTB 2.5 coil springs |
I run a 40 on compression and 60 on rebound. I have over sprung the shocks but I was originally set up for high speed over whoops and terrain with no rocks in Florida. I want to soften up my spring rates to allow more flex of the suspension. I currently run a 12" 350# upper spring and a 14" 450# lower. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|