| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Bump steer http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=4&t=13345 |
Page 1 of 1 |
| Author: | bluebuggy [ Mon Mar 12, 2012 7:33 pm ] |
| Post subject: | Bump steer |
I'm putting a gm rack on. the way I have it setup now I have about 1/2" bump steer I know really none is the idea but is this a safe amount?? I do drive alot on the street Thanks guys |
|
| Author: | RaceBugg1098 [ Tue Mar 13, 2012 2:51 pm ] |
| Post subject: | Re: Bump steer |
I may be wrong, but I think none is about impossible on anything with 8" or more suspension on a vw front end. I'd say your doing good with 1/2". You might be able to get it down a little more to like 3/8". |
|
| Author: | bluebuggy [ Tue Mar 13, 2012 6:23 pm ] |
| Post subject: | Re: Bump steer |
I moved I few things some and got it to 1/4 and if I shim the heim up 3/8 it's down to 1/8 just not sure if that's a good idea to shim it like that. Going to look at it more tonight and see if there is anymore or a better way then what I have. |
|
| Author: | nitro_mudder [ Wed Mar 14, 2012 7:50 am ] |
| Post subject: | Re: Bump steer |
That sounds like you are doing pretty good right there. |
|
| Author: | bluebuggy [ Wed Mar 14, 2012 11:49 am ] |
| Post subject: | Re: Bump steer |
nitro_mudder wrote: That sounds like you are doing pretty good right there. It looked good last night but know I have to make a few parts today and hope it looks the same when it all goes back in ended up having about 1/2 out halfway up and 1/8 to 3/16 all the way so hope it works ok. I just wish looking back know I would of looked at this before I cut the old out to see where it was at stock |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|