Yes, I know, the mudguard is miles out and the wheels are about as round as a 50 pence piece - don't worry, making new ones, gotta move the mudguard as we're making new damper mounting towers too, improve the motion ratio and change the progression curve. Gives an idea of how much travel there is though, that's not quite full compression - it's got another half an inch or so.





Should stop it lifting the front wheels off the floor
Just gotta sort the rack mount 'cause there's some bump steer atm - the beam spacing is narrower than the spindle mounts so after putting some castor and camber in the arms it's cocked the geometery for the rack up, doh!