ok yea on top not on bottom i was confused
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| cv c-clip http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=4&t=11242 |
Page 1 of 1 |
| Author: | rail1914 [ Thu Feb 10, 2011 8:12 pm ] |
| Post subject: | cv c-clip |
just wanted to know the pros and conns of running the cv c-clip run with the clip or with out the clip and why |
|
| Author: | Andrew_Ha [ Thu Feb 10, 2011 8:39 pm ] |
| Post subject: | Re: cv c-clip |
Running with pro axles never pull out. Con CVS r harder to change in the wood Some times if axles r just a hair to short and this is when they pull out |
|
| Author: | jesse [ Mon Feb 14, 2011 10:18 pm ] |
| Post subject: | Re: cv c-clip |
best way to do it is run one on bottom and not one on top that way the axle can have a lil play and not break a cv but it wont slide out ot it could be one on top and not on bottom i dont remember lol |
|
| Author: | Baddvw [ Mon Feb 14, 2011 10:25 pm ] |
| Post subject: | Re: cv c-clip |
Clip on top CV and no clip on bottom CV, always has been running them like this. |
|
| Author: | jesse [ Mon Feb 14, 2011 11:14 pm ] |
| Post subject: | Re: cv c-clip |
ok yea on top not on bottom i was confused
|
|
| Author: | ridenrace6 [ Tue Feb 15, 2011 1:37 am ] |
| Post subject: | Re: cv c-clip |
Baddvw wrote: Clip on top CV and no clip on bottom CV, always has been running them like this. same here |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|