| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| front spindels? http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=4&t=10290 |
Page 1 of 1 |
| Author: | ironhorse [ Wed Sep 15, 2010 5:45 pm ] |
| Post subject: | front spindels? |
what is without a doubt the strongest set of front arms and spindles for buggy take in mind its going on a chaindrive coil over set up in front with thru rods |
|
| Author: | A. Cole [ Wed Sep 15, 2010 9:15 pm ] |
| Post subject: | Re: front spindels? |
Fodrill or Woods would be my vote... http://www.racereadyproducts.com/combo-spindles/ http://www.racereadyproducts.com/trailing-arms-front/ |
|
| Author: | passat2800 [ Wed Sep 15, 2010 10:14 pm ] |
| Post subject: | Re: front spindels? |
Hi Richard . Back in my young days I used to mess with OLD split windshield vw buses.My oldest was a "57. They had MONSTER kink pin front ends and a while back I saw a chain drive with those king pins. They are MASSIVE with large spindles and still carry a beetle 5 lug pattern.There is a bus farm in Tampa or Bus boys in Calif. is all I know. Motion Industries carries lots of bronze bushings.Bus boys can sell u raised or lowered old bus spindles with or with out disc brake ears.I'm not SURE if they are still in business because it has been so long.If it were me I would go to a giant copy of Austin's A-arms and use a Mazda SUV 17" spare tire RIM with an Agriculture tire from Scott's tire in Pinson.Austin has a 16"Cherokee homemade rim now. |
|
| Author: | passat2800 [ Wed Sep 15, 2010 10:18 pm ] |
| Post subject: | Re: front spindels? |
Hi Cole. Now those are NICE!But all I know is making junk out of junk. |
|
| Author: | jesse [ Sat Oct 02, 2010 5:50 am ] |
| Post subject: | Re: front spindels? |
a arm seems like the way to go on a chaindrive |
|
| Author: | ncbuggy [ Wed Oct 06, 2010 8:24 pm ] |
| Post subject: | Re: front spindels? |
WADE MADE. I'll get some pics. i made everything but the spindle spud. |
|
| Author: | rockrockets1 [ Wed Oct 06, 2010 9:00 pm ] |
| Post subject: | Re: front spindles? |
If it were me I would have A-arms...A chain drive is only as good as the front end and there ain't enough travel even with 4 over front arms to compensate for the rear end....So it limits you |
|
| Author: | ncbuggy [ Wed Oct 06, 2010 10:50 pm ] |
| Post subject: | Re: front spindels? |
so let me sell you mine and i'll do arms. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|