I run big beef off sets that way you have enough meat to cut out to match your heads and the off set lets your carburator linkage be straight across from one another.I bought mine from CB performance.
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| dual idf intake manifold ? http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=9999 |
Page 1 of 1 |
| Author: | ridenrace6 [ Sun Aug 01, 2010 8:40 pm ] |
| Post subject: | dual idf intake manifold ? |
ok so whats the lowdown on whats what with the different intakes ( tall, short, straight, offset, space saver, big beef, etc. ) and which ones are best to use? also is there a certain brand that better than the others? |
|
| Author: | pipedope [ Sun Aug 01, 2010 9:25 pm ] |
| Post subject: | Re: dual idf intake manifold ? |
I run big beef off sets that way you have enough meat to cut out to match your heads and the off set lets your carburator linkage be straight across from one another.I bought mine from CB performance.
|
|
| Author: | kyjr.buggy1 [ Mon Aug 02, 2010 9:16 am ] |
| Post subject: | Re: dual idf intake manifold ? |
Same here. Big Beefs, match ported. |
|
| Author: | chris38375 [ Mon Aug 02, 2010 10:53 am ] |
| Post subject: | Re: dual idf intake manifold ? |
the taller they are the more throttle response u have |
|
| Author: | RaceBugg1098 [ Mon Aug 02, 2010 12:43 pm ] |
| Post subject: | Re: dual idf intake manifold ? |
Taller is suppost to mean more tourque, other than thatthe bigger and straighter, the better |
|
| Author: | ridenrace6 [ Wed Aug 04, 2010 9:27 pm ] |
| Post subject: | Re: dual idf intake manifold ? |
thanks for the input guys ive got a new set of the short sraight intakes with place to drill and tap for nos but i guess i need to find me some of the big beef tall offset intakes so that i can have them port matched to the Street Eliminator heads i traded for |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|