WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

Oil cooler adapter plate
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=8661		 Page 1 of 1
Author:  dirtdobber [ Sun Feb 07, 2010 12:25 pm ]
Post subject:  Oil cooler adapter plate
I have found in a box an aluminum plate that bolts under the factory oil cooler. It has inlet and outlet for external oil lines has any body ever used one. it has a pat.number that is it.
Author:  gasman [ Sun Feb 07, 2010 7:55 pm ]
Post subject:  Re: Oil cooler adapter plate
never seen one of these could you post a pic.would be cool to see this.chad :mrgreen:
Author:  dirtdobber [ Sun Feb 07, 2010 11:55 pm ]
Post subject:  Re: Oil cooler adapter plate
Ill get my wife to post pick tomorrow . ill get pat number to . someone in jacksonville florida made it . idid look pat .number up. Looks like it would work good ,but have not ever seen one
Author:  MickeyMouse [ Mon Feb 08, 2010 12:19 am ]
Post subject:  Re: Oil cooler adapter plate
I have seen them before but I believe you need to modify the shroud since the plate will raise the oil cooler.
Author:  ridenrace6 [ Mon Feb 08, 2010 12:42 am ]
Post subject:  Re: Oil cooler adapter plate
i got one on my old blue buggy, they are for the old style non doghouse style coolers and shroud setup,,,, im letting a buddy of mine run that motor right now while he is rebuilding his so i ill have to look next time we ride but i dont think i did any modifications to the shroud except maybe notch out at the bottom for the lines to come out ,,,,,also i bought it from larrys offroad about 6 or 7 years ago but the best i remember it came in a claudes buggies package,,,,,,check and see if this is what u have im thinking were talking about the same thing anyways

http://www.cbperformance.com/catalog.asp?ProductID=212
Author:  dirtdobber [ Mon Feb 08, 2010 12:32 pm ]
Post subject:  Re: Oil cooler adapter plate
That is it.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/