ok so the stock type1 studs will not come through the 3 rib transaxle so i need the longer studs whihc are about 90mm...
where can i find these
or does anyone have 2 that they can part with...
ian
910-520-2126
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| lower two studs in case helpo! http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=8326 |
Page 1 of 1 |
| Author: | DUBclub [ Mon Dec 28, 2009 1:38 pm ] |
| Post subject: | lower two studs in case helpo! |
ok so the stock type1 studs will not come through the 3 rib transaxle so i need the longer studs whihc are about 90mm... where can i find these or does anyone have 2 that they can part with... ian 910-520-2126 |
|
| Author: | turboblue [ Mon Dec 28, 2009 1:44 pm ] |
| Post subject: | Re: lower two studs in case helpo! |
DUBclub wrote: ok so the stock type1 studs will not come through the 3 rib transaxle so i need the longer studs whihc are about 90mm... where can i find these or does anyone have 2 that they can part with... ian 910-520-2126 Get a piece of metric all thread. Local hardware probably has it. 10mm x 1.5 pitch and cut whatever length you need |
|
| Author: | DUBclub [ Mon Dec 28, 2009 2:44 pm ] |
| Post subject: | Re: lower two studs in case helpo! |
ty man...i called granger and they have studs of 10 x 1.5 x 95 so i might go that route...ty for the idea if that does not work out... |
|
| Author: | rockrockets1 [ Mon Dec 28, 2009 8:51 pm ] |
| Post subject: | Re: lower two studs in case helpo! |
take a old 10 mm case stud and cut it to length ,run a 3/8 die on it use 2 3/8 flanged nuts 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|