| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| bus engine??? http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=8248 |
Page 1 of 1 |
| Author: | ridgebuggy [ Thu Dec 10, 2009 3:15 am ] |
| Post subject: | bus engine??? |
I have been lookin around for a motor for my buggy and i ran across a complete bus engine and automatic or stickomatic tranny for 300 bucks |
|
| Author: | FOX SHOX [ Thu Dec 10, 2009 7:04 am ] |
| Post subject: | Re: bus engine??? |
Get the engine code. Is it F.I. or does it have carbs? Thanks Dave T |
|
| Author: | vw_brandon [ Thu Dec 10, 2009 9:14 am ] |
| Post subject: | Re: bus engine??? |
not sure,but ive herd a set of headers for a bus motor are bout 300.00 and the exhaust ports i guess is what call them makes you loose about 3 in. of clearance |
|
| Author: | instigator [ Thu Dec 10, 2009 9:25 am ] |
| Post subject: | Re: bus engine??? |
make your own headers. would look like what the suby would run. |
|
| Author: | ridgebuggy [ Thu Dec 10, 2009 4:44 pm ] |
| Post subject: | Re: bus engine??? |
i dont have the engine code but it does have dual stock carbs.i saw a exaust set up in jc whitney for around 60 or 70 bucks it has a cherry bomb type muffler on it.this may sound dumb but this is a type 4 motor isnt it |
|
| Author: | ridgebuggy [ Thu Dec 10, 2009 4:53 pm ] |
| Post subject: | Re: bus engine??? |
i also have a buddy with a buggy that has a bus motor he got it running and together mostly and parked it like a year and a half ago it also has dual stock carbs i would like to get it also and use it for parts the frame has rust holes in it and it is a very short buggy.i think 400 to 450 would get it |
|
| Author: | vw_brandon [ Thu Dec 10, 2009 5:31 pm ] |
| Post subject: | Re: bus engine??? |
ridgebuggy wrote: i dont have the engine code but it does have dual stock carbs.i saw a exaust set up in jc whitney for around 60 or 70 bucks it has a cherry bomb type muffler on it.this may sound dumb but this is a type 4 motor isnt it dont know bout that but check around the samba they should have a set of used headers |
|
| Author: | FOX SHOX [ Thu Dec 10, 2009 6:21 pm ] |
| Post subject: | Re: bus engine??? |
Yes they are called a type 4 engine also. If the engine has the 3 stud intake manifolds then it could be a Porsche engine |
|
| Author: | ridgebuggy [ Thu Dec 10, 2009 9:56 pm ] |
| Post subject: | Re: bus engine??? |
thanks for all the info guys that type 4 site is awsome and i will definetly check out that samba site for headers.cant thank yall enough |
|
| Author: | ridenrace6 [ Fri Dec 11, 2009 1:30 am ] |
| Post subject: | Re: bus engine??? |
not trying to hijack thread but cant the type 4 engine be built to like a 2900 or so ? if so what size crank and jugs do they use? |
|
| Author: | bradley59dzl [ Fri Dec 11, 2009 2:05 am ] |
| Post subject: | Re: bus engine??? |
2980? |
|
| Author: | FOX SHOX [ Sat Dec 12, 2009 3:39 pm ] |
| Post subject: | Re: bus engine??? |
84 crank with 105pistons http://www.europeanmotorworks.com/vw/ty ... Parts.html this will net a 2909 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|