| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| crank power steering pulley http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=6537 |
Page 1 of 1 |
| Author: | A. Cole [ Sat May 09, 2009 12:02 am ] |
| Post subject: | crank power steering pulley |
I'm looking at the saco power steering pulley, but need a type 3 crank bolt. I cant seem to find one. My next option is to just get the howe pulley / bolt combo. Any Ideas on the t3 crank bolt? |
|
| Author: | hillaholic [ Sat May 09, 2009 1:35 am ] |
| Post subject: | Re: crank power steering pulley |
Try this guy. He has the pulleys listed and says he has other type3 parts http://www.thesamba.com/vw/classifieds/ ... ?id=333405 I think plumberbill has the entire billet Howe setup minus the pump. |
|
| Author: | A. Cole [ Sat May 09, 2009 7:23 am ] |
| Post subject: | Re: crank power steering pulley |
Thanks Hillaholic, I sent him an email. Just trying to save a few bucks where I can. The saco pulley is much cheaper than the howe pulley but the saco requires a t-3 bolt. |
|
| Author: | Odyknuck [ Thu May 14, 2009 2:03 pm ] |
| Post subject: | Re: crank power steering pulley |
I have a brand new Saco Pully that I did not use if your Interested for 35 bucks shipped. When I did my setup I used a different pully and made an adapter that required a longer bolt than a T3. I welded a metric bolt to the end of a standard crank pully bolt to get the length I needed.The bolt I ued was about the same length of a T3 and I may have an extra. Call me. Steve 216-695-0733 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|