This good or not 69 MM VOLKSRACER FORGED COUNTERWEIGHTED CRANKSHAFT
I was look at this one
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| good or not http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=6111 |
Page 1 of 1 |
| Author: | hossbuggy [ Fri Mar 20, 2009 7:58 pm ] |
| Post subject: | good or not |
This good or not 69 MM VOLKSRACER FORGED COUNTERWEIGHTED CRANKSHAFT I was look at this one
|
|
| Author: | Odyknuck [ Fri Mar 20, 2009 10:10 pm ] |
| Post subject: | Re: good or not |
Its fine if all you want is a stock stroke motor. With over the counter 94mm Pistons and cylinders the biggest motor you can build is a 1915. |
|
| Author: | rockrockets1 [ Sat Mar 21, 2009 8:18 am ] |
| Post subject: | Re: good or not |
Trow a few extra bucks in and get you a stroker .You will be glad you did trust me 
|
|
| Author: | m.ralston [ Sat Mar 21, 2009 8:01 pm ] |
| Post subject: | Re: good or not |
Like RR said,buy a strocker crank. I have built a few motors with the 74 mm crank from CB Performance and it was only $179. It is easier to set your compression ratio with a strocker crank,you just buy barrel shims to adjust it. JMO |
|
| Author: | Strong [ Sat Mar 21, 2009 9:01 pm ] |
| Post subject: | Re: good or not |
Always build the LARGEST motor within reason. My type 1 is 2643cc. Remember "There is no replacement for displacement' |
|
| Author: | hossbuggy [ Sat Mar 21, 2009 9:09 pm ] |
| Post subject: | Re: good or not |
Thank guy but I have 3 rid and got lot of money in it that i can not get back so am run it to the gave that is keep me from the big crank |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|