i really wish i could go out and buy pistons and stuff. start a collection for me to get motor? haha help me out? lol
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| displacement http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=4912 |
Page 1 of 1 |
| Author: | frankenbuggy06 [ Sat Oct 18, 2008 12:03 pm ] |
| Post subject: | displacement |
what kind of displacement would a 82 mm crank, 87mm pistion and a engle 110 cam. & if possible what about a HP range? prolly have 7 or 8 to 1 CR. and stock heads |
|
| Author: | rockrockets1 [ Sat Oct 18, 2008 3:17 pm ] |
| Post subject: | Re: displacement |
my question is WHY |
|
| Author: | frankenbuggy06 [ Sat Oct 18, 2008 3:46 pm ] |
| Post subject: | Re: displacement |
budget. im getting the crank for 60 bucks. and the case is already clearenced. trust me i'd love to buy tht motor u have 4 sale but..... i have about 200 left and i dont have anymore than that to spend |
|
| Author: | chris38375 [ Sat Oct 18, 2008 4:20 pm ] |
| Post subject: | Re: displacement |
most of the time if someone clearenced the block for 82 stroke crank it is probally cut for 92 or 94mm jugs,i dont know that but any ive ever seen is |
|
| Author: | vwtravis [ Sat Oct 18, 2008 10:14 pm ] |
| Post subject: | Re: displacement |
1950 cc |
|
| Author: | Stevo [ Sun Oct 19, 2008 8:25 am ] |
| Post subject: | Re: displacement |
chris38375 wrote: most of the time if someone clearenced the block for 82 stroke crank it is probally cut for 92 or 94mm jugs,i dont know that but any ive ever seen is Chris is most likley right, If they clearenced they also cut at same time. |
|
| Author: | frankenbuggy06 [ Mon Oct 20, 2008 9:00 am ] |
| Post subject: | Re: displacement |
itisnt cut for 94's it was just clearenced. The guy was gonna build a class 16 or somthing buggy. Where youcouldonly have a stroker motor with stock pistons. so if i am just puttingthe 82 crank and the 87mm pistons, could anyone tell me what i am lookin at? |
|
| Author: | chris38375 [ Mon Oct 20, 2008 4:30 pm ] |
| Post subject: | Re: displacement |
vwtravis says 1950 |
|
| Author: | Roy [ Mon Oct 20, 2008 7:49 pm ] |
| Post subject: | Re: displacement |
Your looking at a very, very WIDE engine. You will have to custom make all your cylinder tins, push rods and tubes and exhaust system. Can it be done? Sure it can. Is it worth it, no it's not. Save up the extra 200 dollars and buy the stroker "B" pistons and put them in. If your gonna go, go big. |
|
| Author: | frankenbuggy06 [ Tue Oct 21, 2008 10:02 am ] |
| Post subject: | Re: displacement |
i really wish i could go out and buy pistons and stuff. start a collection for me to get motor? haha help me out? lol
|
|
| Author: | BUGGYMAN [ Fri Oct 24, 2008 7:59 pm ] |
| Post subject: | Re: displacement |
Sell some of your buggy parts to buy some new buggy parts.....thats what I always do. I know if you own a buggy you have extra parts laying around. Just my 2 cents...Donnie |
|
| Author: | Aaron Creech [ Fri Oct 24, 2008 8:45 pm ] |
| Post subject: | Re: displacement |
Unless you are using a long rod i don't think tthe pistons will clear the crank at BDC without alot of grinding which will weaken them.that is unless you have stroker 87mm pistons which I don't think they ever made.i would save your money or see if you can do some trading. |
|
| Author: | 60sunroof [ Tue Oct 28, 2008 6:40 pm ] |
| Post subject: | Re: displacement |
Take Aaron's advice and save some cash and do some trading for the 94 stroker piston. You will be happier in the long run.the 82x87 is short term smart but long term dumb. |
|
| Author: | wildwillie [ Tue Oct 28, 2008 8:15 pm ] |
| Post subject: | Re: displacement |
you asked so iv got a deal for you iv got a good set of 94 stroker p/j all you will need is some new rings you pay shipping send me your info ill send them to you. i think i used them 2or3 times.it will make life ezey on you in the long run.these guys will not steer u wrong your gettin lucky you get to learn from are mistaks it cheeper on you! |
|
| Author: | DVS1 [ Tue Oct 28, 2008 8:49 pm ] |
| Post subject: | Re: displacement |
wildwillie wrote: you asked so iv got a deal for you iv got a good set of 94 stroker p/j all you will need is some new rings you pay shipping send me your info ill send them to you. i think i used them 2or3 times.it will make life ezey on you in the long run.these guys will not steer u wrong your gettin lucky you get to learn from are mistaks it cheeper on you! WOW!! If he don't want them can I have first dibs? |
|
| Author: | frankenbuggy06 [ Thu Oct 30, 2008 12:01 pm ] |
| Post subject: | Re: displacement |
how much would it cost for shipping? to 7171 friendsville rd. medina,oh. 44256 |
|
| Author: | Wicked_spider_ [ Thu Oct 30, 2008 12:22 pm ] |
| Post subject: | Re: displacement |
Hey willie, check your email. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|