lol roy, ya set em straight didnt ya?
-Dakotah
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Rev Limiter? http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=4097 |
Page 1 of 1 |
| Author: | J.DiNapoli [ Tue Jun 24, 2008 8:45 pm ] |
| Post subject: | Rev Limiter? |
What rev limiter should i use? I run 1641 stock carb,110 cam,mofoco 040 heads,lightened flywheel. |
|
| Author: | afterburnt [ Tue Jun 24, 2008 10:48 pm ] |
| Post subject: | Re: Rev Limiter? |
what ignition system do you have? bosch sells a rotor that has a rev limiter bilt in, all you do is lift the cap and slip it into your 09 distributer, it works pretty well, and is only about $25.00 |
|
| Author: | J.DiNapoli [ Tue Jun 24, 2008 11:44 pm ] |
| Post subject: | Re: Rev Limiter? |
09 dizzy with points replacement. will rev limiter work with that? |
|
| Author: | gustograber [ Wed Jun 25, 2008 12:52 pm ] |
| Post subject: | Re: Rev Limiter? |
i bought one of those rev limiter a few years back and it wore out the button in the top of 2 dizz caps in 2 rides. |
|
| Author: | afterburnt [ Thu Jun 26, 2008 12:09 am ] |
| Post subject: | Re: Rev Limiter? |
Actually, that's kind of funny, because when I first put that rotor in, on the first ride, that little button in the distributer cap was gone. So I put a new cap on, thinking the cap was defective. And I never had problems with that little button again, but I always carried an extra cap with me. I never put two and two together. I ran that rotor for about 3 years and it only happened once, so I guess that's not too bad. |
|
| Author: | Roy [ Fri Jun 27, 2008 4:48 am ] |
| Post subject: | Re: Rev Limiter? |
Back to the orig. question, I would use a 5500 limiter in your motor. |
|
| Author: | kyjr.buggy1 [ Fri Jun 27, 2008 6:02 pm ] |
| Post subject: | Re: Rev Limiter? |
lol roy, ya set em straight didnt ya? -Dakotah |
|
| Author: | A. Cole [ Wed Jul 02, 2008 6:12 pm ] |
| Post subject: | Re: Rev Limiter? |
Roy wrote: Back to the orig. question, I would use a 5500 limiter in your motor. I think my 1641 about maxes out at 5000... I don't run a rev limiter but do give all the ol 1641 has everytime. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|