What rev limiter should i use? I run 1641 stock carb,110 cam,mofoco 040 heads,lightened flywheel.

what ignition system do you have? bosch sells a rotor that has a rev limiter bilt in, all you do is lift the cap and slip it into your 09 distributer, it works pretty well, and is only about $25.00

09 dizzy with points replacement. will rev limiter work with that?

i bought one of those rev limiter a few years back and it wore out the button in the top of 2 dizz caps in 2 rides.

_________________
kenny ( AKA D.O.G. )

Actually, that's kind of funny, because when I first put that rotor in, on the first ride, that little button in the distributer cap was gone. So I put a new cap on, thinking the cap was defective. And I never had problems with that little button again, but I always carried an extra cap with me. I never put two and two together. I ran that rotor for about 3 years and it only happened once, so I guess that's not too bad.

Back to the orig. question, I would use a 5500 limiter in your motor.

_________________
________________________________

Buy the best and cry once.

lol roy, ya set em straight didnt ya?

-Dakotah

_________________

-Dakotah/koko
keep on keepin' on!!

I think my 1641 about maxes out at 5000... I don't run a rev limiter but do give all the ol 1641 has everytime.

_________________
A broken clock is right two times a day.