WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

drilled valve motors
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=3444		 Page 1 of 1
Author:  frankenbuggy06 [ Sat Mar 29, 2008 10:08 pm ]
Post subject:  drilled valve motors
what is with the drilled valves? i have a 1641, would that help me at all?
Author:  BUGGYMAN [ Sat Mar 29, 2008 10:27 pm ]
Post subject:  drilled valves
It must help, all the ky boys are running 1641s with drilled valves and look at how good they are, $2000 to the good.
Author:  joeyg1112 [ Sun Mar 30, 2008 6:13 am ]
Post subject: 
I'm grabbin my bits, somebody tell me where to put the holes!!he he.
Author:  Odyknuck [ Sun Mar 30, 2008 9:09 am ]
Post subject: 
Were not going here again are we? :roll:
Author:  joeyg1112 [ Sun Mar 30, 2008 10:42 am ]
Post subject: 
i'm new, i don't know anything about it. is it a secret, or can i get this done to mine?
Author:  BUGGYMAN [ Sun Mar 30, 2008 10:47 am ]
Post subject:  valves
Its a Ky secret. Ask one of the KY boys, I think you have to have a special jig and know the right people to get it done, they wont do it for everyone. It lets the bad compression out of your motor.
Author:  joeyg1112 [ Sun Mar 30, 2008 11:05 am ]
Post subject: 
i've got 34 jobs to do in ky, i wonder if that makes me a ky boy? maybe while i'm down there, i'll see if they'll help me out??
Author:  yankee [ Sun Mar 30, 2008 3:03 pm ]
Post subject: 
That is a great mod for those 1641 really makes come alive however it is very expensive if done wrong ask a pro for a jig :lol: :lol: :lol:
Author:  buggy66 [ Sun Mar 30, 2008 8:48 pm ]
Post subject: 
I run the drilled valves in my 2276 and keep breaking things---- they work great in all sizes of motors! 8)
Author:  Firebug [ Sun Mar 30, 2008 9:01 pm ]
Post subject: 
Looked like Sharpshooter had his valves overdrilled..had to send it back for a redrill job :cry:
Author:  rockrockets1 [ Sun Mar 30, 2008 9:09 pm ]
Post subject: 
Kevin Thomas also
Author:  k.elliott [ Sun Mar 30, 2008 9:33 pm ]
Post subject: 
man o man i have drilled two sets of valves on my 2054 and cant seem to figure it out. somebody help me too.

kevin
Author:  bruce 1 [ Sun Mar 30, 2008 9:38 pm ]
Post subject: 
[quote='k.elliott']man o man i have drilled two sets of valves on my 2054 and cant seem to figure it out. somebody help me too.

kevin[/quote]

you do not have a jig!!!!!
Author:  instigator [ Sun Mar 30, 2008 9:41 pm ]
Post subject: 
you have to have the jig and metic drill bets with a left hand twist.
Author:  k.elliott [ Sun Mar 30, 2008 9:51 pm ]
Post subject: 
i free handed the first set then i took the second set to a machine shop. i am tired of buying new valves.

kevin
Author:  badass [ Mon Mar 31, 2008 12:07 am ]
Post subject: 
I have a 2332 and ive drilled the valves twice, i have 6000$ in this motor. I think you all are screwing with me, the idea of name tags on the hill climb thread will help me out a whole lot, bc im gonna kick some ass at the next one.. and i have names from all the comments that have been made about drilled valves and believe me i will get my moneys worth!!!! no bs :evil: :evil: :evil:
Author:  bruce 1 [ Mon Mar 31, 2008 7:32 am ]
Post subject: 
[quote='badass']I have a 2332 and ive drilled the valves twice, i have 6000$ in this motor. I think you all are screwing with me, the idea of name tags on the hill climb thread will help me out a whole lot, bc im gonna kick some ass at the next one.. and i have names from all the comments that have been made about drilled valves and believe me i will get my moneys worth!!!! no bs :evil: :evil: :evil:[/quote]

The next one is at D&K sounds like you are going to have a blast
Author:  RaceBugg1098 [ Thu Apr 03, 2008 8:33 am ]
Post subject: 
latest rage is selling a valve drilling kit now!! it includes like 3 different sized drill bits, and a fixture. it is coming in july they say
Author:  sharpshooter [ Thu Apr 03, 2008 2:13 pm ]
Post subject: 
:eek: :eek:
Author:  davehix [ Thu Apr 03, 2008 8:58 pm ]
Post subject: 
hell i took mine out and beat them with a hammer and got the same results you would not beleive how it runs :eek:
Author:  RaceBugg1098 [ Fri Apr 04, 2008 10:13 am ]
Post subject: 
i drilled my valves and gained about 15 horsepower on the dyno!!
Author:  DVS1 [ Fri Apr 04, 2008 10:26 am ]
Post subject: 
[quote='davehix']hell i took mine out and beat them with a hammer and got the same results you would not beleive how it runs :eek:[/quote]
I thought it ran that good because you totally emersed it in water and the water cleaned the motor out.
Author:  spectater [ Fri Apr 04, 2008 5:18 pm ]
Post subject: 
Yall are light years behind me, I got a jig and drilled the valves in everything I own. the new trick is to drill the pistons to lube your motor better! :lol:
Author:  Roy [ Fri Apr 04, 2008 7:09 pm ]
Post subject: 
Our race car has drilled pistons. Man is it fast. :mrgreen:
Author:  kybuggy1 [ Sat Apr 05, 2008 2:34 am ]
Post subject: 
[quote='Roy']Our race car has drilled pistons. Man is it fast. :mrgreen:[/quote]

I heard you gotta leave the top compression ring off to do that in a VW. Makes it run like a 2 stroke since you only got 2 rings! :twisted:

Larry
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/