Hey guys im just finishing up on my motor and was just wandering what was the best way to break in my motor every thing but the crank is brand new even the valve seats are new i want to do it right last time i put it together i jumped in it and took off side ways 1st 2nd and 3rd down the driveway !!!

_________________
Lets Ride!!!

run it without water

_________________
If your clutch ain't slippin,, you probably got it adjusted right!!!!!

beak it in the way u are gonna drive it i say.my two cents

_________________
when in doubt gas it

Thanks man that has it all according to that i had it all wrong haha

_________________
Lets Ride!!!

[quote='buggyrider28']beak it in the way u are gonna drive it i say.my two cents[/quote] I did that last time and it started smokin after about 4 or 5 rides i geus i turned it up to much

_________________
Lets Ride!!!

W F O

_________________
i dont always ride my buggy but when i do im glad it has a bad ass bow tie makin the horsepower

Jesus loves me, but everyone else thinks im an asshole.

Our Lady of Blessed Acceleration, don't fail us now!

that is the way i have broke all mine in.toeach there own though

_________________
when in doubt gas it

Mine was brand new Scat engine & they suggested that you run it @ 2000rpms for 20 min.
Bruce

[quote='GAMNTRAIL']Mine was brand new Scat engine & they suggested that you run it @ 2000rpms for 20 min.
Bruce[/quote]
You have to do that to break in the cam and lifters!!or you will have major problems down the road.

aaron

take it to al.and enter it in a hill climb thats what i did

[quote='GAMNTRAIL']Mine was brand new Scat engine & they suggested that you run it @ 2000rpms for 20 min.
Bruce[/quote] I thought it wasn;t good to hold a new engine at one rpm to long ??????????

_________________
Lets Ride!!!

[quote='travisdunebuggy'][quote='GAMNTRAIL']Mine was brand new Scat engine & they suggested that you run it @ 2000rpms for 20 min.
Bruce[/quote] I thought it wasn;t good to hold a new engine at one rpm to long ??????????[/quote]

Thats usually how the directions that come with the cam say to do it to break in the cam and lifters!

aaron

Everyone probally has their own way of doing it , thats just what my paper work said to do, so I followed it. My engine has never given me any problems or smoked.
Before I bought my new engine I was always told to take it easy with the new ( rebuilt ) engine for the first 500 miles, for a woods buggy that might take awhile. Good luck with it Travis, let us know how it runs.
Bruce

after the 20 min. break in let it cool down change the oil, and then run it how you want.

[quote='bruce 1']after the 20 min. break in let it cool down change the oil, and then run it how you want.[/quote]

I agree with this but I always keep the rpm's under 3,500 for the first two or three days. Then let it rip.

thanks guys ill tie a rope to the top of my shoe when it starts gettin heavy ill pull it back a little hahahaha

_________________
Lets Ride!!!