| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| 1600 VW FLYWHEEL http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=17909 |
Page 1 of 1 |
| Author: | gregmartin [ Sun Oct 11, 2015 5:14 pm ] |
| Post subject: | 1600 VW FLYWHEEL |
I have a 1600 Air Cooled VW Motor that I have been working on for a long time now. I have a Counterbalanced 8 Doweled Crank I bought in 1999. The project been put on hold for 15 years or so. My question is the 8 Dowel Flywheel that I bought in 2015 doesn't seem to fit. It measures like it should, but it doesn't slide on like I thought it would. I don't want to force anything, but it should fit regardless if they are bought 16 years apart. Or should they.? Sent from my iPad using Tapatalk |
|
| Author: | helmetguy [ Sun Oct 11, 2015 9:13 pm ] |
| Post subject: | Re: 1600 VW FLYWHEEL |
They should be the same, nothing has changed that I know of. Remember there is a dowel that is offset ,so the flywheel will only go one in one position Sent from my SCH-I545L using Tapatalk |
|
| Author: | gregmartin [ Sun Oct 11, 2015 10:08 pm ] |
| Post subject: | Re: 1600 VW FLYWHEEL |
Thanks for the info helmetguy I did not know that. This is my first flywheel The offset must be minor because I kinda thought about that and looked for it and didn't see anything obvious. Is it Marked somewhere? Sent from my iPad using Tapatalk |
|
| Author: | helmetguy [ Mon Oct 12, 2015 7:49 am ] |
| Post subject: | Re: 1600 VW FLYWHEEL |
No its not marked , but yes difference is pretty small. For me its easier to see on the flywheel. Make sure you set your end play correctly, I think its .002-.006 Sent from my SCH-I545L using Tapatalk |
|
| Author: | gregmartin [ Mon Oct 12, 2015 9:38 am ] |
| Post subject: | Re: 1600 VW FLYWHEEL |
Thanks, it's tight but slid right on. Sent from my iPad using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|