WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
8 pass oil cooler vs. oil cooler with fan http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=17880 |
Page 1 of 1 |
Author: | mydadsagearhead [ Sat Sep 05, 2015 5:41 pm ] |
Post subject: | 8 pass oil cooler vs. oil cooler with fan |
I have installed an 8 pass oil cooler with no fan. I also have a cooler with temperature switch at 185 then a fan kicks on ( not installed). I have upgraded my 1835 to a 2275 I realize the new engine will run hotter....should I add the cooler with the fan and have both coolers or leave it alone and just run the 8 pass. Or install the cooler with fan and get rid of 8 pass. Or none of the above. |
Author: | jimp [ Sun Sep 06, 2015 8:12 am ] |
Post subject: | Re: 8 pass oil cooler vs. oil cooler with fan |
Since there are situations where you will not want ANY oil flowing through ANY cooler at all, you may want to read this thread: http://www.thesamba.com/vw/forum/viewtopic.php?t=469077 There is discussion about thermostatically- controlled oil cooler bypass plumbing. Here is the "sandwich" type: http://vwparts.aircooled.net/Mocal-Ther ... dapter.htm It is also mentioned that cylinder head temp is critical. I have always wondered if cooled oil should be directly routed to the heads somehow??? It works well on Harley-Davidson air-cooled motorcycle engines. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |