| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| A 2332 engine build .. 4-sale first $2,500 firm http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=16517 |
Page 1 of 2 |
| Author: | darrell [ Mon Jan 06, 2014 10:01 am ] |
| Post subject: | A 2332 engine build .. 4-sale first $2,500 firm |
Thought a few of you guys might like looking at some pics i took on this rebuild... |
|
| Author: | darrell [ Mon Jan 06, 2014 10:09 am ] | ||||
| Post subject: | Re: A 2332 engine build .. a few pics for you guys | ||||
Posted using the WoodsBuggy Mobile App This build started out with and aluminum block and a set of 5.5 cb. Rods . 84 mm crank and yeah it is lightened
|
|||||
| Author: | darrell [ Mon Jan 06, 2014 10:16 am ] | ||||
| Post subject: | Re: A 2332 engine build .. a few pics for you guys | ||||
Posted using the WoodsBuggy Mobile App Used a set of CB 044 heads stainless steel pushrod tubes new rings specially ground cam a set of Scott rockers chromoly push rods
|
|||||
| Author: | darrell [ Mon Jan 06, 2014 10:21 am ] | ||||
| Post subject: | Re: A 2332 engine build .. a few pics for you guys | ||||
Posted using the WoodsBuggy Mobile App All new valve springs guides was all replaced new valve job
|
|||||
| Author: | darrell [ Mon Jan 06, 2014 10:27 am ] | ||||
| Post subject: | Re: A 2332 engine build .. a few pics for you guys | ||||
Posted using the WoodsBuggy Mobile App I used a type 4 oil cooler they work so much better then the type 1 a little extra work cutting tens and fittings . I also used CB oil pump dry sump . Diamond Dave was helping me cut the tens for the wider oil cooler
|
|||||
| Author: | darrell [ Mon Jan 06, 2014 10:30 am ] | |||
| Post subject: | Re: A 2332 engine build .. a few pics for you guys | |||
Posted using the WoodsBuggy Mobile App And this is cam break in time. Motor sounds real good I got a video if I can figure out how to put it on here
|
||||
| Author: | darrell [ Mon Jan 06, 2014 10:32 am ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
https://www.facebook.com/photo.php?v=514647955317611 <<<<<<Here is the video of it running |
|
| Author: | dirtdobber [ Mon Jan 06, 2014 11:42 am ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
Nice job Posted using the WoodsBuggy Mobile App |
|
| Author: | Rick [ Mon Jan 06, 2014 12:01 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
Looks good...Did you pick a rzr? |
|
| Author: | helmetguy [ Mon Jan 06, 2014 12:14 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
Looks great!!!! Posted using the WoodsBuggy Mobile App |
|
| Author: | darrell [ Mon Jan 06, 2014 12:31 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
Posted using the WoodsBuggy Mobile App I built this for a customer but thought I would just throw some pics up. I got bored too cold to go outside |
|
| Author: | darrell [ Mon Jan 06, 2014 12:33 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
Posted using the WoodsBuggy Mobile App And the RZR I am just building a new cage for its a friend of mines . I'll throw that on the build form when I get started on it |
|
| Author: | vw1915hillstomper [ Mon Jan 06, 2014 2:42 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
nice job looks awesome cant wait to hear how good it runs 
|
|
| Author: | darrell [ Tue Jan 07, 2014 12:53 am ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
Posted using the WoodsBuggy Mobile App Thanks people I posted a video of it running |
|
| Author: | vw1915hillstomper [ Wed Jan 08, 2014 3:33 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
I am curious. What cam did you use in that motor? I seen that you used 044 heads my dad, brother, and two friends all use the 044s they work great |
|
| Author: | vw1915hillstomper [ Thu Jan 09, 2014 10:59 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
darrell wrote: Posted using the WoodsBuggy Mobile App Thanks people I posted a video of it running just watched the video sounds bad nice job |
|
| Author: | FOX SHOX [ Sun Feb 02, 2014 12:20 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
I would like to see more pics of the oil cooler housing conversion. Thanks Dave T |
|
| Author: | 2800passat [ Sun Feb 02, 2014 1:17 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
Darrel....Get a dam good filter! In that 1 st pic there is residual locktite. I had to break down a motor once because of some other reason. But while I had the rod bearrings off I noticed they had lots of scoring and if you look real close you'd see a tiny tiny red dots here and there. I ran a Fram tough guard, but, I'd change oil and get a filter from Nascar lol. I got a recently rebuilt w/c motor once and it locked up because someone had too much rtv around the valve cover and oil pan and it all clogged the oil pick up screen. Pull your pick-up screen off and investigate! Spray it out with carb cleaner and you will see some red flakes. Catch them while you still can. These tiny red dots get past the oil filter probably thru the built in oil filter relief valve maybe. |
|
| Author: | darrell [ Sun Feb 02, 2014 1:57 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
Posted using the WoodsBuggy Mobile App I don't know what filter you're looking at ? I always use a Wix Mobil 1 or Napa filter they are all made at the same company. I think you're looking at a old filter that I pulled off of a rail buggy a while back but that's not the filter I run the motor on. And I run Brad Penn oil also and I've had my fair share of oil filter problems 2. |
|
| Author: | darrell [ Sun Feb 02, 2014 2:34 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
Posted using the WoodsBuggy Mobile App I see what you're talking about now Passat n that picture. that is not Loctite it is assembly lube that you're looking at if you notice I put it all over the lifter tops also. |
|
| Author: | bige70chevy [ Sun Feb 02, 2014 3:06 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
darrell wrote: Posted using the WoodsBuggy Mobile App I see what you're talking about now Passat n that picture. that is not Loctite it is assembly lube that you're looking at if you notice I put it all over the lifter tops also. darrel did you lock tite the lifters to the cam? or the rockers to the pushrods? maybe we could have lock tited your trailing arm to your oil filter at harlan. hell i might lock tite a roof on my rv if you have any left |
|
| Author: | 2800passat [ Sun Feb 02, 2014 6:25 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
just lookin out for ya. gooood work! Nice powerhouse! |
|
| Author: | darrell [ Sun Feb 02, 2014 8:40 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
Posted using the WoodsBuggy Mobile App I appreciate it. It's all in good fun somebody's gotta say something on here it would be a boring site ... And E you're right I needed some Loctite on them trail in arms for sure maybe everybody could have got some riding n if I would have had a little red Loctite lol |
|
| Author: | BigGreenFord [ Fri Feb 14, 2014 7:13 pm ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
Awesome job! |
|
| Author: | darrell [ Fri Jul 04, 2014 1:32 am ] |
| Post subject: | Re: A 2332 engine build .. a few pics for you guys |
I got this motor for sale first $2,500 complete engine call Darrell for details 1-513-833-3277 only 45 min. of run time still like new... Sent from my SM-G900V using Tapatalk |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|