Cleaning the jets in dellorto carbs i put the small jet in front in the bigger jet hole in the back
. Is there any way to get that jet out without taking the carb apart?
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Well it finally happened. http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=1589 |
Page 1 of 1 |
| Author: | turtleman [ Wed Oct 24, 2007 9:35 pm ] |
| Post subject: | Well it finally happened. |
Cleaning the jets in dellorto carbs i put the small jet in front in the bigger jet hole in the back . Is there any way to get that jet out without taking the carb apart?
|
|
| Author: | kybuggy1 [ Thu Oct 25, 2007 11:26 am ] |
| Post subject: | |
I guess you already tried unbolting the carb and turning it upside down and tapping on it a little. 
Things are rarely that easy though! 
Maybe you could even just take the top plate off the carb and get to 'em. Larry |
|
| Author: | turtleman [ Thu Oct 25, 2007 11:32 am ] |
| Post subject: | |
Yep tried that last night. Unbolted the carb tapped on it. Took top plate off and tapped on it. |
|
| Author: | railridernky [ Thu Oct 25, 2007 10:54 pm ] |
| Post subject: | |
suck it out with a shop vac. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|