trying to put my 40 IDF back together. , when i bought the buggy they had the fuel inlet coming out of the bottom of where the filter screen goes.
it has 7mm X 100 if any one has one that they would like to sale please contact me

oh , before rebuilding the card i was having basic same issue as the other 40 IDF post on here.
but i need the fuel inlet to see if i have fixed it?????????

#56 in this diagram?

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

yea found a few sites that sale theses, but all are 10mm the one on my 40 is 7mm i don't know if they have a different top plate on it or what? had an old 44 and took the top plate off of it and put it on the 40. and got it running to night, besides the leak from the pump diaphragm, Must of kinked it when i installed it.
i have another one that i will put in tomorrow night.
guess i will let you know if this fixed my stalling problem or if i have created a monster!!! LOL!!!
any one out there put a 44 top on 40 bottom and had any success with it? and i am am running 40 air stacks.