There are a few guys that were asking me about power steering pulleys. I use the one from competition engineering,
http://cevw.com/products.php It's a real nice one piece pulley, but it is a little pricey. About $125. There is also the one from saco performance,
http://www.sacoperformance.com/proddeta ... od=64-4150 which is $29 and easy to install. all you do is put it up to your main pulley and drill 3/16 hole about 1/8 inch deep that a roll pin fits into. Then you use a longer crank shaft bolt to hold it together.