| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| breather adaptor question. http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=14572 |
Page 1 of 1 |
| Author: | kymtnman [ Tue Jan 01, 2013 7:31 pm ] |
| Post subject: | breather adaptor question. |
i got a 2110 engine, with a 2bbl carb.will the adaptor. http://bugpack.com/index.php?main_page= ... cts_id=248 cut airflow too much for this engine?or does any one have a better idea on a weather resistant air cleaner for this carb?, i dont like the little square one thats on it .thanks. |
|
| Author: | bige70chevy [ Tue Jan 01, 2013 8:03 pm ] |
| Post subject: | Re: breather adaptor question. |
i think that adapter is good for that carb...i ran that adapter with a 2 stage round breather,ran great. but dont know if that is big enough carb for that motor,mine was on an 1835  this was my winter upgrade last year
|
|
| Author: | gasman [ Tue Jan 01, 2013 8:46 pm ] |
| Post subject: | Re: breather adaptor question. |
Yes that adapter will work with the rubber connector to add a stage 2 breather.Chad 
|
|
| Author: | kymtnman [ Tue Jan 01, 2013 10:44 pm ] |
| Post subject: | Re: breather adaptor question. |
bige70chevy wrote: i think that adapter is good for that carb...i ran that adapter with a 2 stage round breather,ran great. but dont know if that is big enough carb for that motor,mine was on an 1835 this was my winter upgrade last yearyea, i know my carb is a little undersized, just wanted to make sure that the bottleneck on the adaptor wasnt going to hurt it even more. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|