| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| what size drill for 8mm dowel? http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=14142 |
Page 1 of 1 |
| Author: | hpfreak [ Fri Sep 28, 2012 8:34 am ] |
| Post subject: | what size drill for 8mm dowel? |
getting ready to drill my crank but dont know what size drill to use. should these be a press fit or exactly 8mm? |
|
| Author: | BAJABUGNUT [ Fri Sep 28, 2012 6:38 pm ] |
| Post subject: | Re: what size drill for 8mm dowel? |
A quick Google search shows 5/16 = 7.93 mm 21/64 = 8.33 mm |
|
| Author: | bluebuggy [ Fri Sep 28, 2012 6:43 pm ] |
| Post subject: | Re: what size drill for 8mm dowel? |
You really need to ream it 8MM but if you dont have a way to do that you can try a 5/16 it will give you about .002 press fit i have heard of guys do this and it working out. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|