easiest way I've found to remove it. Good job.
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| removing oil fill from gen stand http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=13896 |
Page 1 of 1 |
| Author: | hpfreak [ Tue Jul 24, 2012 6:31 pm ] |
| Post subject: | removing oil fill from gen stand |
anyone got any creative ideas on how to remove the oil fill assembly from the generator stand. I need to switch it to my alternator stand but cant get it off. I thought about welding a big washer to an extension but dont want to waste the extension. |
|
| Author: | bugman505 [ Tue Jul 24, 2012 6:58 pm ] |
| Post subject: | Re: removing oil fill from gen stand |
if you can't get the tool to remove it, then you can take a wide chisel or a thick piece of metal and cut it to fit the nut. there's no easy way. the tool don't work very well. pb blast it for a while before trying it. |
|
| Author: | hpfreak [ Tue Jul 24, 2012 7:25 pm ] |
| Post subject: | Re: removing oil fill from gen stand |
its wrapped in a pb soaked rag right now. |
|
| Author: | buckslyr09 [ Thu Jul 26, 2012 12:30 am ] |
| Post subject: | Re: removing oil fill from gen stand |
If u use the tool and a impact gun it will come off pretty easy.mine did.the tool is only $10. Just push all ur weight on the impact...good luck. |
|
| Author: | hpfreak [ Thu Jul 26, 2012 3:25 pm ] |
| Post subject: | Re: removing oil fill from gen stand |
ended up mangling the sheet metel oil fill trying to get it off. oh well good excuse to get a nice chrome one right? |
|
| Author: | bugman505 [ Thu Jul 26, 2012 7:44 pm ] |
| Post subject: | Re: removing oil fill from gen stand |
easiest way I've found to remove it. Good job.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|