MM, Ive had it out riding 3 times already this year. I had 041 heads on it that have had a lot of work done to them...I was able to get a set of 044's so I put them on along with 1.25 rockers. Since Ive done that swap, maybe 2 weeks ago.. I have found it impossible to get it too run as smoothly as Id like. And correct 1 and 4 are complete opposites of each other. lol I was thinking electrical problem because of that. Not sure exactly what fixed it as I threw every spare part i had at it, cleaned the carb on the #1 side, switched plugs around etc. and it solved the mystery
Compression was a yes, fuel.... check, spark ..check. So...Since it has caused all this headache, It is getting put right back to what ran great along with a new set of rings and I will forget i ever messed with something that had no problems to begin with. lol Thanks for the thoughts though.
i thought it was running great? just the idle was screwed up.
But what I was wrong. Its a sacrifice of running great on the bottom end, or the top. I either get a terrible stumble of the get go, or the top is just poo. I cant stand to have it off on either end . So Ill put it back, and use those heads on my 2276 build, Thinkin ima go with a holley on that one!!