Hey guys, I have a 110 in my 2175 and it has a bolt on gear... this one was sold to me a while back in a 1641... what do you think it is?
Also what the heck are these numbers on my 94mm piston head:
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Help ID this cam -told it was a 110 but has no bolt on gear http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=13280 |
Page 1 of 1 |
| Author: | myrddin [ Thu Mar 01, 2012 8:24 pm ] |
| Post subject: | Help ID this cam -told it was a 110 but has no bolt on gear |
Hey guys, I have a 110 in my 2175 and it has a bolt on gear... this one was sold to me a while back in a 1641... what do you think it is? Also what the heck are these numbers on my 94mm piston head:
|
|
| Author: | Aaron Creech [ Thu Mar 01, 2012 8:37 pm ] |
| Post subject: | Re: Help ID this cam -told it was a 110 but has not bolt on gear |
The cam looks to be a C35. Never seen one with the gear made onto it like that. I wouldn't use it in anything with dual springs or an engine that sees alot of rpm. The numbers on the piston are more than likely used in the manufacturing plant. |
|
| Author: | gasman [ Thu Mar 01, 2012 9:21 pm ] |
| Post subject: | Re: Help ID this cam -told it was a 110 but has not bolt on gear |
Looks to me like it say 84.95,would that not be a stock piston? Chad 
|
|
| Author: | A. Cole [ Thu Mar 01, 2012 9:29 pm ] |
| Post subject: | Re: Help ID this cam -told it was a 110 but has not bolt on gear |
gasman wrote: Looks to me like it say 84.95,would that not be a stock piston? Chad ( M for Mahle) |
|
| Author: | kevin f [ Thu Mar 01, 2012 9:35 pm ] |
| Post subject: | Re: Help ID this cam -told it was a 110 but has not bolt on gear |
Is this out of a GEX motor? I tore one down a while back that had a 110 cam with the gear made directly to the cam. Every thing in the motor was used or reground. |
|
| Author: | myrddin [ Thu Mar 01, 2012 9:37 pm ] |
| Post subject: | Re: Help ID this cam -told it was a 110 but has not bolt on gear |
yeah the pistons are my 94 (93.98)mm pistons... just wondered what the other stuff was... funny I thought it was an E  but yeah they are mahle pistons...
|
|
| Author: | gasman [ Thu Mar 01, 2012 9:42 pm ] |
| Post subject: | Re: Help ID this cam -told it was a 110 but has not bolt on gear |
Take a picture of the whole top of these 94 pistons and post them please.Chad
|
|
| Author: | kevin f [ Thu Mar 01, 2012 11:07 pm ] |
| Post subject: | Re: Help ID this cam -told it was a 110 but has not bolt on gear |
kevin f wrote: Is this out of a GEX motor? I tore one down a while back that had a 110 cam with the gear made directly to the cam. Every thing in the motor was used or reground. kevin f wrote: Is this out of a GEX motor? I tore one down a while back that had a 110 cam with the gear made directly to the cam. Every thing in the motor was used or reground. 
|
|
| Author: | myrddin [ Thu Mar 01, 2012 11:14 pm ] |
| Post subject: | Re: Help ID this cam -told it was a 110 but has no bolt on gear |
It did not come out of a gex build... All I have left are a few of the parts... Pics of pistons on my other motor will be posted tomorrow |
|
| Author: | hyde [ Fri Mar 02, 2012 8:45 pm ] |
| Post subject: | Re: Help ID this cam -told it was a 110 but has no bolt on gear |
Cam is a Scat c35 it close to a w110. c35 285 duration .050 246 lift 1.25 .476 W110 284 duration .050 247 lift 1.25 .490. This cam will Makes good TQ like w110. X2 have not seen one with out bolts don't no if i would put in a hi RPM eng. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|