It is currently Sun May 03, 2026 2:58 pm

View unanswered posts | View active topics


Board index » Tech and Fab » Air Cooled Engines

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
wonnabuggy32
 Post subject: 1915 carb???
PostPosted: Mon Sep 26, 2011 9:12 am 
Offline

Joined: Tue Nov 02, 2010 7:57 pm
Posts: 35
Location: wadsworth,oh
i going to build a 1915 for a winter project... and was wondering what would be a good carb for one and that wouldnt be way expensive... thanks for all the input...
Top
 Profile  
 
perrib
 Post subject: Re: 1915 carb???
PostPosted: Mon Sep 26, 2011 12:47 pm 
Offline

Joined: Fri Nov 23, 2007 11:27 pm
Posts: 496
Location: Chandler Az
Cheap carb is a progressive Weber. It is not easy to vent this carb for offroading. It has a choke for cool and cold weather. You have to take it off to change jets.
Next is a single Weber IDF. The carb will need good preheat to run right in cool and cold weather.
Dual Webers will be simpler to set up run better in cool and cold weather. Down side is they tend to load up at low rpms in rough terrain. There are off road kits to help with this.
You could give us a few details as to what heads and cam your planning to use.
Top
 Profile  
 
giveitagallon
 Post subject: Re: 1915 carb???
PostPosted: Mon Sep 26, 2011 9:16 pm 
Offline
WoodsBuggy Addict
User avatar

Joined: Tue Sep 08, 2009 4:43 pm
Posts: 1847
Location: rittman,ohio ----------- wellsville, water cooled chapter
Forgot to mention that that progressive carb is jetted for a 1915 or 1835 when I bought it Greg so it might work ok if ya want to try it !

_________________
Theirs no replacement for displacement !
Top
 Profile  
 
smever2
 Post subject: Re: 1915 carb???
PostPosted: Mon Sep 26, 2011 9:18 pm 
Offline

Joined: Thu Oct 14, 2010 10:41 pm
Posts: 36
Location: Mount Vernon, KY
I would build a 2165! I built a 1915 only to soon realize I could of gained a few more cc's for no extra funds.

Carb issue, spend the money and find a set of Dellorto 40's on thesamba.com for 400ish. Don't cut any corners and you wont have to spend the money later.
Top
 Profile  
 
giveitagallon
 Post subject: Re: 1915 carb???
PostPosted: Mon Sep 26, 2011 9:29 pm 
Offline
WoodsBuggy Addict
User avatar

Joined: Tue Sep 08, 2009 4:43 pm
Posts: 1847
Location: rittman,ohio ----------- wellsville, water cooled chapter
Or look into the pa proven 4412 and intake they work great and real inexpensive !

_________________
Theirs no replacement for displacement !
Top
 Profile  
 
jesse
 Post subject: Re: 1915 carb???
PostPosted: Tue Sep 27, 2011 1:59 am 
Offline
WoodsBuggy Addict
User avatar

Joined: Fri Nov 30, 2007 4:03 pm
Posts: 3181
Location: leeds alabama
nothing better than a del 40 go on and spend the 300 give or take and be done with it

_________________
Image

I DO NOT FREE BASE COCAINE
Top
 Profile  
 
wonnabuggy32
 Post subject: Re: 1915 carb???
PostPosted: Tue Sep 27, 2011 11:39 am 
Offline

Joined: Tue Nov 02, 2010 7:57 pm
Posts: 35
Location: wadsworth,oh
yea i sent hix a message about that setup!!! if not i think ill try the progressive first since you think its jetted close....
Top
 Profile  
 
hillaholic
 Post subject: Re: 1915 carb???
PostPosted: Tue Sep 27, 2011 9:47 pm 
Offline
WoodsBuggy Addict
User avatar

Joined: Wed Feb 07, 2007 4:21 pm
Posts: 1560
Location: Elyria, Ohio
You will be disappointed running a progressive on a 1915.
Top
 Profile  
 
jesse
 Post subject: Re: 1915 carb???
PostPosted: Wed Sep 28, 2011 1:34 am 
Offline
WoodsBuggy Addict
User avatar

Joined: Fri Nov 30, 2007 4:03 pm
Posts: 3181
Location: leeds alabama
Quote:
You will be disappointed running a progressive on a 1915.


agreed its better to just go on and get the single del and be done with it

_________________
Image

I DO NOT FREE BASE COCAINE
Top
 Profile  
 
jayrod
 Post subject: Re: 1915 carb???
PostPosted: Sun Oct 09, 2011 8:00 pm 
Offline
WB Contributor
User avatar

Joined: Fri Sep 05, 2008 11:22 am
Posts: 1177
Location: Wellsville, Ohio
I had the progressive on my 1915 when i built it, It was previously on my 1641. Lack of funds forced me to run it for a few months, But I went Dual Weber 40's I have no complaints at all Runs amazing.

_________________
"IT IS WHAT IT IS"
Top
 Profile  
 
dalemeeks
 Post subject: Re: 1915 carb???
PostPosted: Mon Oct 10, 2011 8:13 pm 
Offline

Joined: Sat Aug 21, 2010 10:56 pm
Posts: 22
Location: toccoa ga
is it possible to get a set of empi 40s to run right on a 1641. i have some borrowed to try and they do great at higher rpm but in mid range im popping and fluttering kinda like low timing but was ok with the stock duals( type 3).
thanks
dale meeks
Top
 Profile  
 
RDB#3
 Post subject: Re: 1915 carb???
PostPosted: Mon Oct 10, 2011 11:31 pm 
Offline
Southern Buggys / WB Sponsor
User avatar

Joined: Wed Mar 02, 2011 8:15 pm
Posts: 214
Location: London,KY
I've got a brand new crank for a 2165 and a set of used empi carbs for $625.00
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Tech and Fab » Air Cooled Engines

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group